aws-native.globalaccelerator.getEndpointGroup

func LookupEndpointGroup(ctx *Context, args *LookupEndpointGroupArgs, opts ...InvokeOption) (*LookupEndpointGroupResult, error)
func LookupEndpointGroupOutput(ctx *Context, args *LookupEndpointGroupOutputArgs, opts ...InvokeOption) LookupEndpointGroupResultOutput

> Note: This function is named LookupEndpointGroup in the Go SDK.

EndpointGroupArn string

The Amazon Resource Name (ARN) of the endpoint group

EndpointGroupArn string

The Amazon Resource Name (ARN) of the endpoint group

endpointGroupArn String

The Amazon Resource Name (ARN) of the endpoint group

endpointGroupArn string

The Amazon Resource Name (ARN) of the endpoint group

endpoint_group_arn str

The Amazon Resource Name (ARN) of the endpoint group

endpointGroupArn String

The Amazon Resource Name (ARN) of the endpoint group

EndpointConfigurations List<Pulumi.AwsNative.GlobalAccelerator.Outputs.EndpointGroupEndpointConfiguration>

The list of endpoint objects.

EndpointGroupArn string

The Amazon Resource Name (ARN) of the endpoint group

HealthCheckIntervalSeconds int

The time in seconds between each health check for an endpoint. Must be a value of 10 or 30

HealthCheckPath string

If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

HealthCheckPort int

The port that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

HealthCheckProtocol Pulumi.AwsNative.GlobalAccelerator.EndpointGroupHealthCheckProtocol

The protocol that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

PortOverrides List<Pulumi.AwsNative.GlobalAccelerator.Outputs.EndpointGroupPortOverride>

Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

ThresholdCount int

The number of consecutive health checks required to set the state of the endpoint to unhealthy.

TrafficDialPercentage double

The percentage of traffic to sent to an AWS Region

EndpointConfigurations []EndpointGroupEndpointConfiguration

The list of endpoint objects.

EndpointGroupArn string

The Amazon Resource Name (ARN) of the endpoint group

HealthCheckIntervalSeconds int

The time in seconds between each health check for an endpoint. Must be a value of 10 or 30

HealthCheckPath string

If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

HealthCheckPort int

The port that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

HealthCheckProtocol EndpointGroupHealthCheckProtocol

The protocol that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

PortOverrides []EndpointGroupPortOverride

Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

ThresholdCount int

The number of consecutive health checks required to set the state of the endpoint to unhealthy.

TrafficDialPercentage float64

The percentage of traffic to sent to an AWS Region

endpointConfigurations List<EndpointGroupEndpointConfiguration>

The list of endpoint objects.

endpointGroupArn String

The Amazon Resource Name (ARN) of the endpoint group

healthCheckIntervalSeconds Integer

The time in seconds between each health check for an endpoint. Must be a value of 10 or 30

healthCheckPath String

If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

healthCheckPort Integer

The port that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

healthCheckProtocol EndpointGroupHealthCheckProtocol

The protocol that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

portOverrides List<EndpointGroupPortOverride>

Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

thresholdCount Integer

The number of consecutive health checks required to set the state of the endpoint to unhealthy.

trafficDialPercentage Double

The percentage of traffic to sent to an AWS Region

endpointConfigurations EndpointGroupEndpointConfiguration[]

The list of endpoint objects.

endpointGroupArn string

The Amazon Resource Name (ARN) of the endpoint group

healthCheckIntervalSeconds number

The time in seconds between each health check for an endpoint. Must be a value of 10 or 30

healthCheckPath string

If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

healthCheckPort number

The port that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

healthCheckProtocol EndpointGroupHealthCheckProtocol

The protocol that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

portOverrides EndpointGroupPortOverride[]

Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

thresholdCount number

The number of consecutive health checks required to set the state of the endpoint to unhealthy.

trafficDialPercentage number

The percentage of traffic to sent to an AWS Region

endpoint_configurations Sequence[EndpointGroupEndpointConfiguration]

The list of endpoint objects.

endpoint_group_arn str

The Amazon Resource Name (ARN) of the endpoint group

health_check_interval_seconds int

The time in seconds between each health check for an endpoint. Must be a value of 10 or 30

health_check_path str

If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

health_check_port int

The port that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

health_check_protocol EndpointGroupHealthCheckProtocol

The protocol that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

port_overrides Sequence[EndpointGroupPortOverride]

Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

threshold_count int

The number of consecutive health checks required to set the state of the endpoint to unhealthy.

traffic_dial_percentage float

The percentage of traffic to sent to an AWS Region

endpointConfigurations List<Property Map>

The list of endpoint objects.

endpointGroupArn String

The Amazon Resource Name (ARN) of the endpoint group

healthCheckIntervalSeconds Number

The time in seconds between each health check for an endpoint. Must be a value of 10 or 30

healthCheckPath String

If the protocol is HTTP/S, then this value provides the ping path that Global Accelerator uses for the destination on the endpoints for health checks. The default is slash (/).

healthCheckPort Number

The port that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

healthCheckProtocol "TCP" | "HTTP" | "HTTPS"

The protocol that AWS Global Accelerator uses to check the health of endpoints in this endpoint group.

portOverrides List<Property Map>

Allows you to override the destination ports used to route traffic to an endpoint. Using a port override lets you map a list of external destination ports (that your users send traffic to) to a list of internal destination ports that you want an application endpoint to receive traffic on.

thresholdCount Number

The number of consecutive health checks required to set the state of the endpoint to unhealthy.

trafficDialPercentage Number

The percentage of traffic to sent to an AWS Region

EndpointId string

Id of the endpoint. For Network/Application Load Balancer this value is the ARN. For EIP, this value is the allocation ID. For EC2 instances, this is the EC2 instance ID

AttachmentArn string

Attachment ARN that provides access control to the cross account endpoint. Not required for resources hosted in the same account as the endpoint group.

ClientIpPreservationEnabled bool

true if client ip should be preserved

Weight int

The weight for the endpoint.

EndpointId string

Id of the endpoint. For Network/Application Load Balancer this value is the ARN. For EIP, this value is the allocation ID. For EC2 instances, this is the EC2 instance ID

AttachmentArn string

Attachment ARN that provides access control to the cross account endpoint. Not required for resources hosted in the same account as the endpoint group.

ClientIpPreservationEnabled bool

true if client ip should be preserved

Weight int

The weight for the endpoint.

endpointId String

Id of the endpoint. For Network/Application Load Balancer this value is the ARN. For EIP, this value is the allocation ID. For EC2 instances, this is the EC2 instance ID

attachmentArn String

Attachment ARN that provides access control to the cross account endpoint. Not required for resources hosted in the same account as the endpoint group.

clientIpPreservationEnabled Boolean

true if client ip should be preserved

weight Integer

The weight for the endpoint.

endpointId string

Id of the endpoint. For Network/Application Load Balancer this value is the ARN. For EIP, this value is the allocation ID. For EC2 instances, this is the EC2 instance ID

attachmentArn string

Attachment ARN that provides access control to the cross account endpoint. Not required for resources hosted in the same account as the endpoint group.

clientIpPreservationEnabled boolean

true if client ip should be preserved

weight number

The weight for the endpoint.

endpoint_id str

Id of the endpoint. For Network/Application Load Balancer this value is the ARN. For EIP, this value is the allocation ID. For EC2 instances, this is the EC2 instance ID

attachment_arn str

Attachment ARN that provides access control to the cross account endpoint. Not required for resources hosted in the same account as the endpoint group.

client_ip_preservation_enabled bool

true if client ip should be preserved

weight int

The weight for the endpoint.

endpointId String

Id of the endpoint. For Network/Application Load Balancer this value is the ARN. For EIP, this value is the allocation ID. For EC2 instances, this is the EC2 instance ID

attachmentArn String

Attachment ARN that provides access control to the cross account endpoint. Not required for resources hosted in the same account as the endpoint group.

clientIpPreservationEnabled Boolean

true if client ip should be preserved

weight Number

The weight for the endpoint.

EndpointPort int

The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

ListenerPort int

The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

EndpointPort int

The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

ListenerPort int

The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

endpointPort Integer

The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

listenerPort Integer

The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

endpointPort number

The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

listenerPort number

The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

endpoint_port int

The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

listener_port int

The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.

endpointPort Number

The endpoint port that you want a listener port to be mapped to. This is the port on the endpoint, such as the Application Load Balancer or Amazon EC2 instance.

listenerPort Number

The listener port that you want to map to a specific endpoint port. This is the port that user traffic arrives to the Global Accelerator on.