Docs Packages
  1. Packages
  2. vSphere
  3. API Docs
  4. HostPortGroup
vSphere v4.10.0 published on Tuesday, Mar 12, 2024 by Pulumi
pulumi/pulumi-vsphere

vsphere.HostPortGroup

Explore with Pulumi AI

vsphere logo
vSphere v4.10.0 published on Tuesday, Mar 12, 2024 by Pulumi
pulumi/pulumi-vsphere

    The vsphere.HostPortGroup resource can be used to manage port groups on ESXi hosts. These port groups are connected to standard switches, which can be managed by the vsphere.HostVirtualSwitch resource.

    For an overview on vSphere networking concepts, see the product documentation.

    Example Usage

    Create a Virtual Switch and Bind a Port Group:

    import * as pulumi from "@pulumi/pulumi";
import * as vsphere from "@pulumi/vsphere";

const datacenter = vsphere.getDatacenter({
    name: "dc-01",
});
const host = datacenter.then(datacenter => vsphere.getHost({
    name: "esxi-01.example.com",
    datacenterId: datacenter.id,
}));
const hostVirtualSwitch = new vsphere.HostVirtualSwitch("hostVirtualSwitch", {
    hostSystemId: host.then(host => host.id),
    networkAdapters: [
        "vmnic0",
        "vmnic1",
    ],
    activeNics: ["vmnic0"],
    standbyNics: ["vmnic1"],
});
const pg = new vsphere.HostPortGroup("pg", {
    hostSystemId: host.then(host => host.id),
    virtualSwitchName: hostVirtualSwitch.name,
});

    import pulumi
import pulumi_vsphere as vsphere

datacenter = vsphere.get_datacenter(name="dc-01")
host = vsphere.get_host(name="esxi-01.example.com",
    datacenter_id=datacenter.id)
host_virtual_switch = vsphere.HostVirtualSwitch("hostVirtualSwitch",
    host_system_id=host.id,
    network_adapters=[
        "vmnic0",
        "vmnic1",
    ],
    active_nics=["vmnic0"],
    standby_nics=["vmnic1"])
pg = vsphere.HostPortGroup("pg",
    host_system_id=host.id,
    virtual_switch_name=host_virtual_switch.name)

    package main

import (
	"github.com/pulumi/pulumi-vsphere/sdk/v4/go/vsphere"
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		datacenter, err := vsphere.LookupDatacenter(ctx, &vsphere.LookupDatacenterArgs{
			Name: pulumi.StringRef("dc-01"),
		}, nil)
		if err != nil {
			return err
		}
		host, err := vsphere.LookupHost(ctx, &vsphere.LookupHostArgs{
			Name:         pulumi.StringRef("esxi-01.example.com"),
			DatacenterId: datacenter.Id,
		}, nil)
		if err != nil {
			return err
		}
		hostVirtualSwitch, err := vsphere.NewHostVirtualSwitch(ctx, "hostVirtualSwitch", &vsphere.HostVirtualSwitchArgs{
			HostSystemId: *pulumi.String(host.Id),
			NetworkAdapters: pulumi.StringArray{
				pulumi.String("vmnic0"),
				pulumi.String("vmnic1"),
			},
			ActiveNics: pulumi.StringArray{
				pulumi.String("vmnic0"),
			},
			StandbyNics: pulumi.StringArray{
				pulumi.String("vmnic1"),
			},
		})
		if err != nil {
			return err
		}
		_, err = vsphere.NewHostPortGroup(ctx, "pg", &vsphere.HostPortGroupArgs{
			HostSystemId:      *pulumi.String(host.Id),
			VirtualSwitchName: hostVirtualSwitch.Name,
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using VSphere = Pulumi.VSphere;

return await Deployment.RunAsync(() => 
{
    var datacenter = VSphere.GetDatacenter.Invoke(new()
    {
        Name = "dc-01",
    });

    var host = VSphere.GetHost.Invoke(new()
    {
        Name = "esxi-01.example.com",
        DatacenterId = datacenter.Apply(getDatacenterResult => getDatacenterResult.Id),
    });

    var hostVirtualSwitch = new VSphere.HostVirtualSwitch("hostVirtualSwitch", new()
    {
        HostSystemId = host.Apply(getHostResult => getHostResult.Id),
        NetworkAdapters = new[]
        {
            "vmnic0",
            "vmnic1",
        },
        ActiveNics = new[]
        {
            "vmnic0",
        },
        StandbyNics = new[]
        {
            "vmnic1",
        },
    });

    var pg = new VSphere.HostPortGroup("pg", new()
    {
        HostSystemId = host.Apply(getHostResult => getHostResult.Id),
        VirtualSwitchName = hostVirtualSwitch.Name,
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.vsphere.VsphereFunctions;
import com.pulumi.vsphere.inputs.GetDatacenterArgs;
import com.pulumi.vsphere.inputs.GetHostArgs;
import com.pulumi.vsphere.HostVirtualSwitch;
import com.pulumi.vsphere.HostVirtualSwitchArgs;
import com.pulumi.vsphere.HostPortGroup;
import com.pulumi.vsphere.HostPortGroupArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        final var datacenter = VsphereFunctions.getDatacenter(GetDatacenterArgs.builder()
            .name("dc-01")
            .build());

        final var host = VsphereFunctions.getHost(GetHostArgs.builder()
            .name("esxi-01.example.com")
            .datacenterId(datacenter.applyValue(getDatacenterResult -> getDatacenterResult.id()))
            .build());

        var hostVirtualSwitch = new HostVirtualSwitch("hostVirtualSwitch", HostVirtualSwitchArgs.builder()        
            .hostSystemId(host.applyValue(getHostResult -> getHostResult.id()))
            .networkAdapters(            
                "vmnic0",
                "vmnic1")
            .activeNics("vmnic0")
            .standbyNics("vmnic1")
            .build());

        var pg = new HostPortGroup("pg", HostPortGroupArgs.builder()        
            .hostSystemId(host.applyValue(getHostResult -> getHostResult.id()))
            .virtualSwitchName(hostVirtualSwitch.name())
            .build());

    }
}

    resources:
  hostVirtualSwitch:
    type: vsphere:HostVirtualSwitch
    properties:
      hostSystemId: ${host.id}
      networkAdapters:
        - vmnic0
        - vmnic1
      activeNics:
        - vmnic0
      standbyNics:
        - vmnic1
  pg:
    type: vsphere:HostPortGroup
    properties:
      hostSystemId: ${host.id}
      virtualSwitchName: ${hostVirtualSwitch.name}
variables:
  datacenter:
    fn::invoke:
      Function: vsphere:getDatacenter
      Arguments:
        name: dc-01
  host:
    fn::invoke:
      Function: vsphere:getHost
      Arguments:
        name: esxi-01.example.com
        datacenterId: ${datacenter.id}

    Create a Port Group with a VLAN and ab Override:

    This example sets the trunk mode VLAN (4095, which passes through all tags) and sets allow_promiscuous to ensure that all traffic is seen on the port. The setting overrides the implicit default of false set on the standard switch.

    import * as pulumi from "@pulumi/pulumi";
import * as vsphere from "@pulumi/vsphere";

const datacenter = vsphere.getDatacenter({
    name: "dc-01",
});
const host = datacenter.then(datacenter => vsphere.getHost({
    name: "esxi-01.example.com",
    datacenterId: datacenter.id,
}));
const hostVirtualSwitch = new vsphere.HostVirtualSwitch("hostVirtualSwitch", {
    hostSystemId: host.then(host => host.id),
    networkAdapters: [
        "vmnic0",
        "vmnic1",
    ],
    activeNics: ["vmnic0"],
    standbyNics: ["vmnic1"],
});
const pg = new vsphere.HostPortGroup("pg", {
    hostSystemId: host.then(host => host.id),
    virtualSwitchName: hostVirtualSwitch.name,
    vlanId: 4095,
    allowPromiscuous: true,
});

    import pulumi
import pulumi_vsphere as vsphere

datacenter = vsphere.get_datacenter(name="dc-01")
host = vsphere.get_host(name="esxi-01.example.com",
    datacenter_id=datacenter.id)
host_virtual_switch = vsphere.HostVirtualSwitch("hostVirtualSwitch",
    host_system_id=host.id,
    network_adapters=[
        "vmnic0",
        "vmnic1",
    ],
    active_nics=["vmnic0"],
    standby_nics=["vmnic1"])
pg = vsphere.HostPortGroup("pg",
    host_system_id=host.id,
    virtual_switch_name=host_virtual_switch.name,
    vlan_id=4095,
    allow_promiscuous=True)

    package main

import (
	"github.com/pulumi/pulumi-vsphere/sdk/v4/go/vsphere"
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		datacenter, err := vsphere.LookupDatacenter(ctx, &vsphere.LookupDatacenterArgs{
			Name: pulumi.StringRef("dc-01"),
		}, nil)
		if err != nil {
			return err
		}
		host, err := vsphere.LookupHost(ctx, &vsphere.LookupHostArgs{
			Name:         pulumi.StringRef("esxi-01.example.com"),
			DatacenterId: datacenter.Id,
		}, nil)
		if err != nil {
			return err
		}
		hostVirtualSwitch, err := vsphere.NewHostVirtualSwitch(ctx, "hostVirtualSwitch", &vsphere.HostVirtualSwitchArgs{
			HostSystemId: *pulumi.String(host.Id),
			NetworkAdapters: pulumi.StringArray{
				pulumi.String("vmnic0"),
				pulumi.String("vmnic1"),
			},
			ActiveNics: pulumi.StringArray{
				pulumi.String("vmnic0"),
			},
			StandbyNics: pulumi.StringArray{
				pulumi.String("vmnic1"),
			},
		})
		if err != nil {
			return err
		}
		_, err = vsphere.NewHostPortGroup(ctx, "pg", &vsphere.HostPortGroupArgs{
			HostSystemId:      *pulumi.String(host.Id),
			VirtualSwitchName: hostVirtualSwitch.Name,
			VlanId:            pulumi.Int(4095),
			AllowPromiscuous:  pulumi.Bool(true),
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using VSphere = Pulumi.VSphere;

return await Deployment.RunAsync(() => 
{
    var datacenter = VSphere.GetDatacenter.Invoke(new()
    {
        Name = "dc-01",
    });

    var host = VSphere.GetHost.Invoke(new()
    {
        Name = "esxi-01.example.com",
        DatacenterId = datacenter.Apply(getDatacenterResult => getDatacenterResult.Id),
    });

    var hostVirtualSwitch = new VSphere.HostVirtualSwitch("hostVirtualSwitch", new()
    {
        HostSystemId = host.Apply(getHostResult => getHostResult.Id),
        NetworkAdapters = new[]
        {
            "vmnic0",
            "vmnic1",
        },
        ActiveNics = new[]
        {
            "vmnic0",
        },
        StandbyNics = new[]
        {
            "vmnic1",
        },
    });

    var pg = new VSphere.HostPortGroup("pg", new()
    {
        HostSystemId = host.Apply(getHostResult => getHostResult.Id),
        VirtualSwitchName = hostVirtualSwitch.Name,
        VlanId = 4095,
        AllowPromiscuous = true,
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.vsphere.VsphereFunctions;
import com.pulumi.vsphere.inputs.GetDatacenterArgs;
import com.pulumi.vsphere.inputs.GetHostArgs;
import com.pulumi.vsphere.HostVirtualSwitch;
import com.pulumi.vsphere.HostVirtualSwitchArgs;
import com.pulumi.vsphere.HostPortGroup;
import com.pulumi.vsphere.HostPortGroupArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        final var datacenter = VsphereFunctions.getDatacenter(GetDatacenterArgs.builder()
            .name("dc-01")
            .build());

        final var host = VsphereFunctions.getHost(GetHostArgs.builder()
            .name("esxi-01.example.com")
            .datacenterId(datacenter.applyValue(getDatacenterResult -> getDatacenterResult.id()))
            .build());

        var hostVirtualSwitch = new HostVirtualSwitch("hostVirtualSwitch", HostVirtualSwitchArgs.builder()        
            .hostSystemId(host.applyValue(getHostResult -> getHostResult.id()))
            .networkAdapters(            
                "vmnic0",
                "vmnic1")
            .activeNics("vmnic0")
            .standbyNics("vmnic1")
            .build());

        var pg = new HostPortGroup("pg", HostPortGroupArgs.builder()        
            .hostSystemId(host.applyValue(getHostResult -> getHostResult.id()))
            .virtualSwitchName(hostVirtualSwitch.name())
            .vlanId(4095)
            .allowPromiscuous(true)
            .build());

    }
}

    resources:
  hostVirtualSwitch:
    type: vsphere:HostVirtualSwitch
    properties:
      hostSystemId: ${host.id}
      networkAdapters:
        - vmnic0
        - vmnic1
      activeNics:
        - vmnic0
      standbyNics:
        - vmnic1
  pg:
    type: vsphere:HostPortGroup
    properties:
      hostSystemId: ${host.id}
      virtualSwitchName: ${hostVirtualSwitch.name}
      vlanId: 4095
      allowPromiscuous: true
variables:
  datacenter:
    fn::invoke:
      Function: vsphere:getDatacenter
      Arguments:
        name: dc-01
  host:
    fn::invoke:
      Function: vsphere:getHost
      Arguments:
        name: esxi-01.example.com
        datacenterId: ${datacenter.id}

    Create HostPortGroup Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new HostPortGroup(name: string, args: HostPortGroupArgs, opts?: CustomResourceOptions);
    @overload
def HostPortGroup(resource_name: str,
                  args: HostPortGroupArgs,
                  opts: Optional[ResourceOptions] = None)

@overload
def HostPortGroup(resource_name: str,
                  opts: Optional[ResourceOptions] = None,
                  host_system_id: Optional[str] = None,
                  virtual_switch_name: Optional[str] = None,
                  notify_switches: Optional[bool] = None,
                  shaping_average_bandwidth: Optional[int] = None,
                  check_beacon: Optional[bool] = None,
                  failback: Optional[bool] = None,
                  allow_mac_changes: Optional[bool] = None,
                  name: Optional[str] = None,
                  active_nics: Optional[Sequence[str]] = None,
                  allow_promiscuous: Optional[bool] = None,
                  shaping_burst_size: Optional[int] = None,
                  shaping_enabled: Optional[bool] = None,
                  shaping_peak_bandwidth: Optional[int] = None,
                  standby_nics: Optional[Sequence[str]] = None,
                  teaming_policy: Optional[str] = None,
                  allow_forged_transmits: Optional[bool] = None,
                  vlan_id: Optional[int] = None)
    func NewHostPortGroup(ctx *Context, name string, args HostPortGroupArgs, opts ...ResourceOption) (*HostPortGroup, error)
    public HostPortGroup(string name, HostPortGroupArgs args, CustomResourceOptions? opts = null)
    public HostPortGroup(String name, HostPortGroupArgs args)
public HostPortGroup(String name, HostPortGroupArgs args, CustomResourceOptions options)

    type: vsphere:HostPortGroup
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

    Parameters

    name string
    The unique name of the resource.
    args HostPortGroupArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args HostPortGroupArgs
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args HostPortGroupArgs
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args HostPortGroupArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args HostPortGroupArgs
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Example

    The following reference example uses placeholder values for all input properties.

    var hostPortGroupResource = new VSphere.HostPortGroup("hostPortGroupResource", new()
{
    HostSystemId = "string",
    VirtualSwitchName = "string",
    NotifySwitches = false,
    ShapingAverageBandwidth = 0,
    CheckBeacon = false,
    Failback = false,
    AllowMacChanges = false,
    Name = "string",
    ActiveNics = new[]
    {
        "string",
    },
    AllowPromiscuous = false,
    ShapingBurstSize = 0,
    ShapingEnabled = false,
    ShapingPeakBandwidth = 0,
    StandbyNics = new[]
    {
        "string",
    },
    TeamingPolicy = "string",
    AllowForgedTransmits = false,
    VlanId = 0,
});

    example, err := vsphere.NewHostPortGroup(ctx, "hostPortGroupResource", &vsphere.HostPortGroupArgs{
	HostSystemId:            pulumi.String("string"),
	VirtualSwitchName:       pulumi.String("string"),
	NotifySwitches:          pulumi.Bool(false),
	ShapingAverageBandwidth: pulumi.Int(0),
	CheckBeacon:             pulumi.Bool(false),
	Failback:                pulumi.Bool(false),
	AllowMacChanges:         pulumi.Bool(false),
	Name:                    pulumi.String("string"),
	ActiveNics: pulumi.StringArray{
		pulumi.String("string"),
	},
	AllowPromiscuous:     pulumi.Bool(false),
	ShapingBurstSize:     pulumi.Int(0),
	ShapingEnabled:       pulumi.Bool(false),
	ShapingPeakBandwidth: pulumi.Int(0),
	StandbyNics: pulumi.StringArray{
		pulumi.String("string"),
	},
	TeamingPolicy:        pulumi.String("string"),
	AllowForgedTransmits: pulumi.Bool(false),
	VlanId:               pulumi.Int(0),
})

    var hostPortGroupResource = new HostPortGroup("hostPortGroupResource", HostPortGroupArgs.builder()        
    .hostSystemId("string")
    .virtualSwitchName("string")
    .notifySwitches(false)
    .shapingAverageBandwidth(0)
    .checkBeacon(false)
    .failback(false)
    .allowMacChanges(false)
    .name("string")
    .activeNics("string")
    .allowPromiscuous(false)
    .shapingBurstSize(0)
    .shapingEnabled(false)
    .shapingPeakBandwidth(0)
    .standbyNics("string")
    .teamingPolicy("string")
    .allowForgedTransmits(false)
    .vlanId(0)
    .build());

    host_port_group_resource = vsphere.HostPortGroup("hostPortGroupResource",
    host_system_id="string",
    virtual_switch_name="string",
    notify_switches=False,
    shaping_average_bandwidth=0,
    check_beacon=False,
    failback=False,
    allow_mac_changes=False,
    name="string",
    active_nics=["string"],
    allow_promiscuous=False,
    shaping_burst_size=0,
    shaping_enabled=False,
    shaping_peak_bandwidth=0,
    standby_nics=["string"],
    teaming_policy="string",
    allow_forged_transmits=False,
    vlan_id=0)

    const hostPortGroupResource = new vsphere.HostPortGroup("hostPortGroupResource", {
    hostSystemId: "string",
    virtualSwitchName: "string",
    notifySwitches: false,
    shapingAverageBandwidth: 0,
    checkBeacon: false,
    failback: false,
    allowMacChanges: false,
    name: "string",
    activeNics: ["string"],
    allowPromiscuous: false,
    shapingBurstSize: 0,
    shapingEnabled: false,
    shapingPeakBandwidth: 0,
    standbyNics: ["string"],
    teamingPolicy: "string",
    allowForgedTransmits: false,
    vlanId: 0,
});

    type: vsphere:HostPortGroup
properties:
    activeNics:
        - string
    allowForgedTransmits: false
    allowMacChanges: false
    allowPromiscuous: false
    checkBeacon: false
    failback: false
    hostSystemId: string
    name: string
    notifySwitches: false
    shapingAverageBandwidth: 0
    shapingBurstSize: 0
    shapingEnabled: false
    shapingPeakBandwidth: 0
    standbyNics:
        - string
    teamingPolicy: string
    virtualSwitchName: string
    vlanId: 0

    HostPortGroup Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    The HostPortGroup resource accepts the following input properties:

    HostSystemId string
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    VirtualSwitchName string
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    ActiveNics List<string>
    List of active network adapters used for load balancing.
    AllowForgedTransmits bool
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    AllowMacChanges bool
    Controls whether or not the Media Access Control (MAC) address can be changed.
    AllowPromiscuous bool
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    CheckBeacon bool
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    Failback bool
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    Name string
    The name of the port group. Forces a new resource if changed.
    NotifySwitches bool
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    ShapingAverageBandwidth int
    The average bandwidth in bits per second if traffic shaping is enabled.
    ShapingBurstSize int
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    ShapingEnabled bool
    Enable traffic shaping on this virtual switch or port group.
    ShapingPeakBandwidth int
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    StandbyNics List<string>
    List of standby network adapters used for failover.
    TeamingPolicy string
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    VlanId int
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    HostSystemId string
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    VirtualSwitchName string
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    ActiveNics []string
    List of active network adapters used for load balancing.
    AllowForgedTransmits bool
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    AllowMacChanges bool
    Controls whether or not the Media Access Control (MAC) address can be changed.
    AllowPromiscuous bool
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    CheckBeacon bool
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    Failback bool
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    Name string
    The name of the port group. Forces a new resource if changed.
    NotifySwitches bool
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    ShapingAverageBandwidth int
    The average bandwidth in bits per second if traffic shaping is enabled.
    ShapingBurstSize int
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    ShapingEnabled bool
    Enable traffic shaping on this virtual switch or port group.
    ShapingPeakBandwidth int
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    StandbyNics []string
    List of standby network adapters used for failover.
    TeamingPolicy string
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    VlanId int
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    hostSystemId String
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    virtualSwitchName String
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    activeNics List<String>
    List of active network adapters used for load balancing.
    allowForgedTransmits Boolean
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allowMacChanges Boolean
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allowPromiscuous Boolean
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    checkBeacon Boolean
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    failback Boolean
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    name String
    The name of the port group. Forces a new resource if changed.
    notifySwitches Boolean
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    shapingAverageBandwidth Integer
    The average bandwidth in bits per second if traffic shaping is enabled.
    shapingBurstSize Integer
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shapingEnabled Boolean
    Enable traffic shaping on this virtual switch or port group.
    shapingPeakBandwidth Integer
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standbyNics List<String>
    List of standby network adapters used for failover.
    teamingPolicy String
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    vlanId Integer
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    hostSystemId string
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    virtualSwitchName string
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    activeNics string[]
    List of active network adapters used for load balancing.
    allowForgedTransmits boolean
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allowMacChanges boolean
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allowPromiscuous boolean
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    checkBeacon boolean
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    failback boolean
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    name string
    The name of the port group. Forces a new resource if changed.
    notifySwitches boolean
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    shapingAverageBandwidth number
    The average bandwidth in bits per second if traffic shaping is enabled.
    shapingBurstSize number
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shapingEnabled boolean
    Enable traffic shaping on this virtual switch or port group.
    shapingPeakBandwidth number
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standbyNics string[]
    List of standby network adapters used for failover.
    teamingPolicy string
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    vlanId number
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    host_system_id str
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    virtual_switch_name str
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    active_nics Sequence[str]
    List of active network adapters used for load balancing.
    allow_forged_transmits bool
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allow_mac_changes bool
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allow_promiscuous bool
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    check_beacon bool
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    failback bool
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    name str
    The name of the port group. Forces a new resource if changed.
    notify_switches bool
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    shaping_average_bandwidth int
    The average bandwidth in bits per second if traffic shaping is enabled.
    shaping_burst_size int
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shaping_enabled bool
    Enable traffic shaping on this virtual switch or port group.
    shaping_peak_bandwidth int
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standby_nics Sequence[str]
    List of standby network adapters used for failover.
    teaming_policy str
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    vlan_id int
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    hostSystemId String
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    virtualSwitchName String
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    activeNics List<String>
    List of active network adapters used for load balancing.
    allowForgedTransmits Boolean
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allowMacChanges Boolean
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allowPromiscuous Boolean
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    checkBeacon Boolean
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    failback Boolean
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    name String
    The name of the port group. Forces a new resource if changed.
    notifySwitches Boolean
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    shapingAverageBandwidth Number
    The average bandwidth in bits per second if traffic shaping is enabled.
    shapingBurstSize Number
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shapingEnabled Boolean
    Enable traffic shaping on this virtual switch or port group.
    shapingPeakBandwidth Number
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standbyNics List<String>
    List of standby network adapters used for failover.
    teamingPolicy String
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    vlanId Number
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the HostPortGroup resource produces the following output properties:

    ComputedPolicy Dictionary<string, string>
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    Id string
    The provider-assigned unique ID for this managed resource.
    Key string
    The key for this port group as returned from the vSphere API.
    Ports List<Pulumi.VSphere.Outputs.HostPortGroupPort>
    A list of ports that currently exist and are used on this port group.
    ComputedPolicy map[string]string
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    Id string
    The provider-assigned unique ID for this managed resource.
    Key string
    The key for this port group as returned from the vSphere API.
    Ports []HostPortGroupPort
    A list of ports that currently exist and are used on this port group.
    computedPolicy Map<String,String>
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    id String
    The provider-assigned unique ID for this managed resource.
    key String
    The key for this port group as returned from the vSphere API.
    ports List<HostPortGroupPort>
    A list of ports that currently exist and are used on this port group.
    computedPolicy {[key: string]: string}
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    id string
    The provider-assigned unique ID for this managed resource.
    key string
    The key for this port group as returned from the vSphere API.
    ports HostPortGroupPort[]
    A list of ports that currently exist and are used on this port group.
    computed_policy Mapping[str, str]
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    id str
    The provider-assigned unique ID for this managed resource.
    key str
    The key for this port group as returned from the vSphere API.
    ports Sequence[HostPortGroupPort]
    A list of ports that currently exist and are used on this port group.
    computedPolicy Map<String>
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    id String
    The provider-assigned unique ID for this managed resource.
    key String
    The key for this port group as returned from the vSphere API.
    ports List<Property Map>
    A list of ports that currently exist and are used on this port group.

    Look up Existing HostPortGroup Resource

    Get an existing HostPortGroup resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: HostPortGroupState, opts?: CustomResourceOptions): HostPortGroup
    @staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        active_nics: Optional[Sequence[str]] = None,
        allow_forged_transmits: Optional[bool] = None,
        allow_mac_changes: Optional[bool] = None,
        allow_promiscuous: Optional[bool] = None,
        check_beacon: Optional[bool] = None,
        computed_policy: Optional[Mapping[str, str]] = None,
        failback: Optional[bool] = None,
        host_system_id: Optional[str] = None,
        key: Optional[str] = None,
        name: Optional[str] = None,
        notify_switches: Optional[bool] = None,
        ports: Optional[Sequence[HostPortGroupPortArgs]] = None,
        shaping_average_bandwidth: Optional[int] = None,
        shaping_burst_size: Optional[int] = None,
        shaping_enabled: Optional[bool] = None,
        shaping_peak_bandwidth: Optional[int] = None,
        standby_nics: Optional[Sequence[str]] = None,
        teaming_policy: Optional[str] = None,
        virtual_switch_name: Optional[str] = None,
        vlan_id: Optional[int] = None) -> HostPortGroup
    func GetHostPortGroup(ctx *Context, name string, id IDInput, state *HostPortGroupState, opts ...ResourceOption) (*HostPortGroup, error)
    public static HostPortGroup Get(string name, Input<string> id, HostPortGroupState? state, CustomResourceOptions? opts = null)
    public static HostPortGroup get(String name, Output<String> id, HostPortGroupState state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    ActiveNics List<string>
    List of active network adapters used for load balancing.
    AllowForgedTransmits bool
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    AllowMacChanges bool
    Controls whether or not the Media Access Control (MAC) address can be changed.
    AllowPromiscuous bool
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    CheckBeacon bool
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    ComputedPolicy Dictionary<string, string>
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    Failback bool
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    HostSystemId string
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    Key string
    The key for this port group as returned from the vSphere API.
    Name string
    The name of the port group. Forces a new resource if changed.
    NotifySwitches bool
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    Ports List<Pulumi.VSphere.Inputs.HostPortGroupPort>
    A list of ports that currently exist and are used on this port group.
    ShapingAverageBandwidth int
    The average bandwidth in bits per second if traffic shaping is enabled.
    ShapingBurstSize int
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    ShapingEnabled bool
    Enable traffic shaping on this virtual switch or port group.
    ShapingPeakBandwidth int
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    StandbyNics List<string>
    List of standby network adapters used for failover.
    TeamingPolicy string
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    VirtualSwitchName string
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    VlanId int
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    ActiveNics []string
    List of active network adapters used for load balancing.
    AllowForgedTransmits bool
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    AllowMacChanges bool
    Controls whether or not the Media Access Control (MAC) address can be changed.
    AllowPromiscuous bool
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    CheckBeacon bool
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    ComputedPolicy map[string]string
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    Failback bool
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    HostSystemId string
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    Key string
    The key for this port group as returned from the vSphere API.
    Name string
    The name of the port group. Forces a new resource if changed.
    NotifySwitches bool
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    Ports []HostPortGroupPortArgs
    A list of ports that currently exist and are used on this port group.
    ShapingAverageBandwidth int
    The average bandwidth in bits per second if traffic shaping is enabled.
    ShapingBurstSize int
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    ShapingEnabled bool
    Enable traffic shaping on this virtual switch or port group.
    ShapingPeakBandwidth int
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    StandbyNics []string
    List of standby network adapters used for failover.
    TeamingPolicy string
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    VirtualSwitchName string
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    VlanId int
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    activeNics List<String>
    List of active network adapters used for load balancing.
    allowForgedTransmits Boolean
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allowMacChanges Boolean
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allowPromiscuous Boolean
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    checkBeacon Boolean
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    computedPolicy Map<String,String>
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    failback Boolean
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    hostSystemId String
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    key String
    The key for this port group as returned from the vSphere API.
    name String
    The name of the port group. Forces a new resource if changed.
    notifySwitches Boolean
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    ports List<HostPortGroupPort>
    A list of ports that currently exist and are used on this port group.
    shapingAverageBandwidth Integer
    The average bandwidth in bits per second if traffic shaping is enabled.
    shapingBurstSize Integer
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shapingEnabled Boolean
    Enable traffic shaping on this virtual switch or port group.
    shapingPeakBandwidth Integer
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standbyNics List<String>
    List of standby network adapters used for failover.
    teamingPolicy String
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    virtualSwitchName String
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    vlanId Integer
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    activeNics string[]
    List of active network adapters used for load balancing.
    allowForgedTransmits boolean
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allowMacChanges boolean
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allowPromiscuous boolean
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    checkBeacon boolean
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    computedPolicy {[key: string]: string}
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    failback boolean
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    hostSystemId string
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    key string
    The key for this port group as returned from the vSphere API.
    name string
    The name of the port group. Forces a new resource if changed.
    notifySwitches boolean
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    ports HostPortGroupPort[]
    A list of ports that currently exist and are used on this port group.
    shapingAverageBandwidth number
    The average bandwidth in bits per second if traffic shaping is enabled.
    shapingBurstSize number
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shapingEnabled boolean
    Enable traffic shaping on this virtual switch or port group.
    shapingPeakBandwidth number
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standbyNics string[]
    List of standby network adapters used for failover.
    teamingPolicy string
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    virtualSwitchName string
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    vlanId number
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    active_nics Sequence[str]
    List of active network adapters used for load balancing.
    allow_forged_transmits bool
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allow_mac_changes bool
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allow_promiscuous bool
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    check_beacon bool
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    computed_policy Mapping[str, str]
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    failback bool
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    host_system_id str
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    key str
    The key for this port group as returned from the vSphere API.
    name str
    The name of the port group. Forces a new resource if changed.
    notify_switches bool
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    ports Sequence[HostPortGroupPortArgs]
    A list of ports that currently exist and are used on this port group.
    shaping_average_bandwidth int
    The average bandwidth in bits per second if traffic shaping is enabled.
    shaping_burst_size int
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shaping_enabled bool
    Enable traffic shaping on this virtual switch or port group.
    shaping_peak_bandwidth int
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standby_nics Sequence[str]
    List of standby network adapters used for failover.
    teaming_policy str
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    virtual_switch_name str
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    vlan_id int
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.
    activeNics List<String>
    List of active network adapters used for load balancing.
    allowForgedTransmits Boolean
    Controls whether or not the virtual network adapter is allowed to send network traffic with a different MAC address than that of its own.
    allowMacChanges Boolean
    Controls whether or not the Media Access Control (MAC) address can be changed.
    allowPromiscuous Boolean
    Enable promiscuous mode on the network. This flag indicates whether or not all traffic is seen on a given port.
    checkBeacon Boolean
    Enable beacon probing. Requires that the vSwitch has been configured to use a beacon. If disabled, link status is used only.
    computedPolicy Map<String>
    A map with a full set of the policy options computed from defaults and overrides, explaining the effective policy for this port group.
    failback Boolean
    If true, the teaming policy will re-activate failed interfaces higher in precedence when they come back up.
    hostSystemId String
    The managed object ID of the host to set the port group up on. Forces a new resource if changed.
    key String
    The key for this port group as returned from the vSphere API.
    name String
    The name of the port group. Forces a new resource if changed.
    notifySwitches Boolean
    If true, the teaming policy will notify the broadcast network of a NIC failover, triggering cache updates.
    ports List<Property Map>
    A list of ports that currently exist and are used on this port group.
    shapingAverageBandwidth Number
    The average bandwidth in bits per second if traffic shaping is enabled.
    shapingBurstSize Number
    The maximum burst size allowed in bytes if traffic shaping is enabled.
    shapingEnabled Boolean
    Enable traffic shaping on this virtual switch or port group.
    shapingPeakBandwidth Number
    The peak bandwidth during bursts in bits per second if traffic shaping is enabled.
    standbyNics List<String>
    List of standby network adapters used for failover.
    teamingPolicy String
    The network adapter teaming policy. Can be one of loadbalance_ip, loadbalance_srcmac, loadbalance_srcid, or failover_explicit.
    virtualSwitchName String
    The name of the virtual switch to bind this port group to. Forces a new resource if changed.
    vlanId Number
    The VLAN ID/trunk mode for this port group. An ID of 0 denotes no tagging, an ID of 1-4094 tags with the specific ID, and an ID of 4095 enables trunk mode, allowing the guest to manage its own tagging. Default: 0.

    Supporting Types

    HostPortGroupPort, HostPortGroupPortArgs

    Key string
    The key for this port group as returned from the vSphere API.
    MacAddresses List<string>
    The MAC addresses of the network service of the virtual machine connected on this port.
    Type string
    Type type of the entity connected on this port. Possible values are host (VMKkernel), systemManagement (service console), virtualMachine, or unknown.
    Key string
    The key for this port group as returned from the vSphere API.
    MacAddresses []string
    The MAC addresses of the network service of the virtual machine connected on this port.
    Type string
    Type type of the entity connected on this port. Possible values are host (VMKkernel), systemManagement (service console), virtualMachine, or unknown.
    key String
    The key for this port group as returned from the vSphere API.
    macAddresses List<String>
    The MAC addresses of the network service of the virtual machine connected on this port.
    type String
    Type type of the entity connected on this port. Possible values are host (VMKkernel), systemManagement (service console), virtualMachine, or unknown.
    key string
    The key for this port group as returned from the vSphere API.
    macAddresses string[]
    The MAC addresses of the network service of the virtual machine connected on this port.
    type string
    Type type of the entity connected on this port. Possible values are host (VMKkernel), systemManagement (service console), virtualMachine, or unknown.
    key str
    The key for this port group as returned from the vSphere API.
    mac_addresses Sequence[str]
    The MAC addresses of the network service of the virtual machine connected on this port.
    type str
    Type type of the entity connected on this port. Possible values are host (VMKkernel), systemManagement (service console), virtualMachine, or unknown.
    key String
    The key for this port group as returned from the vSphere API.
    macAddresses List<String>
    The MAC addresses of the network service of the virtual machine connected on this port.
    type String
    Type type of the entity connected on this port. Possible values are host (VMKkernel), systemManagement (service console), virtualMachine, or unknown.

    Import

    ing

    An existing host port group can be imported into this resource using the host port group’s ID. An example is below:

    import * as pulumi from "@pulumi/pulumi";

    import pulumi

    using System.Collections.Generic;
using System.Linq;
using Pulumi;

return await Deployment.RunAsync(() => 
{
});

    package main

import (
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		return nil
	})
}

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
    }
}

    {}

    The above would import the management host port group from host with ID host-123.

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    vSphere pulumi/pulumi-vsphere
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the vsphere Terraform Provider.
    vsphere logo
    vSphere v4.10.0 published on Tuesday, Mar 12, 2024 by Pulumi
    pulumi/pulumi-vsphere