cm

This provider is a derived work of the Terraform Provider distributed under MPL 2.0. If you encounter a bug or missing feature, first check the pulumi/pulumi-f5bigip repo; however, if that doesn’t turn up anything, please consult the source terraform-providers/terraform-provider-f5bigip repo.

class pulumi_f5bigip.cm.Device(resource_name, opts=None, configsync_ip=None, mirror_ip=None, mirror_secondary_ip=None, name=None, __props__=None, __name__=None, __opts__=None)

cm.Device provides details about a specific bigip

This resource is helpful when configuring the BIG-IP device in cluster or in HA mode.

import pulumi
import pulumi_f5bigip as f5bigip

my_new_device = f5bigip.cm.Device("myNewDevice",
    configsync_ip="2.2.2.2",
    mirror_ip="10.10.10.10",
    mirror_secondary_ip="11.11.11.11",
    name="bigip300.f5.com")
Parameters
  • resource_name (str) – The name of the resource.

  • opts (pulumi.ResourceOptions) – Options for the resource.

  • configsync_ip (pulumi.Input[str]) – IP address used for config sync

  • mirror_ip (pulumi.Input[str]) – IP address used for state mirroring

  • mirror_secondary_ip (pulumi.Input[str]) – Secondary IP address used for state mirroring

  • name (pulumi.Input[str]) – Address of the Device which needs to be Deviceensed

configsync_ip: pulumi.Output[str] = None

IP address used for config sync

mirror_ip: pulumi.Output[str] = None

IP address used for state mirroring

mirror_secondary_ip: pulumi.Output[str] = None

Secondary IP address used for state mirroring

name: pulumi.Output[str] = None

Address of the Device which needs to be Deviceensed

static get(resource_name, id, opts=None, configsync_ip=None, mirror_ip=None, mirror_secondary_ip=None, name=None)

Get an existing Device resource’s state with the given name, id, and optional extra properties used to qualify the lookup.

Parameters
  • resource_name (str) – The unique name of the resulting resource.

  • id (str) – The unique provider ID of the resource to lookup.

  • opts (pulumi.ResourceOptions) – Options for the resource.

  • configsync_ip (pulumi.Input[str]) – IP address used for config sync

  • mirror_ip (pulumi.Input[str]) – IP address used for state mirroring

  • mirror_secondary_ip (pulumi.Input[str]) – Secondary IP address used for state mirroring

  • name (pulumi.Input[str]) – Address of the Device which needs to be Deviceensed

translate_output_property(prop)

Provides subclasses of Resource an opportunity to translate names of output properties into a format of their choosing before writing those properties to the resource object.

Parameters

prop (str) – A property name.

Returns

A potentially transformed property name.

Return type

str

translate_input_property(prop)

Provides subclasses of Resource an opportunity to translate names of input properties into a format of their choosing before sending those properties to the Pulumi engine.

Parameters

prop (str) – A property name.

Returns

A potentially transformed property name.

Return type

str

class pulumi_f5bigip.cm.DeviceGroup(resource_name, opts=None, auto_sync=None, description=None, devices=None, full_load_on_sync=None, incremental_config=None, name=None, network_failover=None, partition=None, save_on_auto_sync=None, type=None, __props__=None, __name__=None, __opts__=None)

cm.DeviceGroup A device group is a collection of BIG-IP devices that are configured to securely synchronize their BIG-IP configuration data, and fail over when needed.

import pulumi
import pulumi_f5bigip as f5bigip

my_new_devicegroup = f5bigip.cm.DeviceGroup("myNewDevicegroup",
    auto_sync="enabled",
    devices=[
        {
            "name": "bigip1.cisco.com",
        },
        {
            "name": "bigip200.f5.com",
        },
    ],
    full_load_on_sync="true",
    name="sanjose_devicegroup",
    type="sync-only")
Parameters
  • resource_name (str) – The name of the resource.

  • opts (pulumi.ResourceOptions) – Options for the resource.

  • auto_sync (pulumi.Input[str]) – Specifies if the device-group will automatically sync configuration data to its members

  • description (pulumi.Input[str]) – Description of Device group

  • devices (pulumi.Input[list]) – Name of the device to be included in device group, this need to be configured before using devicegroup resource

  • full_load_on_sync (pulumi.Input[str]) – Specifies if the device-group will perform a full-load upon sync

  • incremental_config (pulumi.Input[float]) – Specifies the maximum size (in KB) to devote to incremental config sync cached transactions. The default is 1024 KB.

  • name (pulumi.Input[str]) – Is the name of the device Group

  • network_failover (pulumi.Input[str]) – Specifies if the device-group will use a network connection for failover

  • partition (pulumi.Input[str]) – Device administrative partition

  • save_on_auto_sync (pulumi.Input[str]) – Specifies whether the configuration should be saved upon auto-sync.

  • type (pulumi.Input[str]) – Specifies if the device-group will be used for failover or resource syncing

The devices object supports the following:

  • name (pulumi.Input[str]) - Is the name of the device Group

  • setSyncLeader (pulumi.Input[bool])

auto_sync: pulumi.Output[str] = None

Specifies if the device-group will automatically sync configuration data to its members

description: pulumi.Output[str] = None

Description of Device group

devices: pulumi.Output[list] = None

Name of the device to be included in device group, this need to be configured before using devicegroup resource

  • name (str) - Is the name of the device Group

  • setSyncLeader (bool)

full_load_on_sync: pulumi.Output[str] = None

Specifies if the device-group will perform a full-load upon sync

incremental_config: pulumi.Output[float] = None

Specifies the maximum size (in KB) to devote to incremental config sync cached transactions. The default is 1024 KB.

name: pulumi.Output[str] = None

Is the name of the device Group

network_failover: pulumi.Output[str] = None

Specifies if the device-group will use a network connection for failover

partition: pulumi.Output[str] = None

Device administrative partition

save_on_auto_sync: pulumi.Output[str] = None

Specifies whether the configuration should be saved upon auto-sync.

type: pulumi.Output[str] = None

Specifies if the device-group will be used for failover or resource syncing

static get(resource_name, id, opts=None, auto_sync=None, description=None, devices=None, full_load_on_sync=None, incremental_config=None, name=None, network_failover=None, partition=None, save_on_auto_sync=None, type=None)

Get an existing DeviceGroup resource’s state with the given name, id, and optional extra properties used to qualify the lookup.

Parameters
  • resource_name (str) – The unique name of the resulting resource.

  • id (str) – The unique provider ID of the resource to lookup.

  • opts (pulumi.ResourceOptions) – Options for the resource.

  • auto_sync (pulumi.Input[str]) – Specifies if the device-group will automatically sync configuration data to its members

  • description (pulumi.Input[str]) – Description of Device group

  • devices (pulumi.Input[list]) – Name of the device to be included in device group, this need to be configured before using devicegroup resource

  • full_load_on_sync (pulumi.Input[str]) – Specifies if the device-group will perform a full-load upon sync

  • incremental_config (pulumi.Input[float]) – Specifies the maximum size (in KB) to devote to incremental config sync cached transactions. The default is 1024 KB.

  • name (pulumi.Input[str]) – Is the name of the device Group

  • network_failover (pulumi.Input[str]) – Specifies if the device-group will use a network connection for failover

  • partition (pulumi.Input[str]) – Device administrative partition

  • save_on_auto_sync (pulumi.Input[str]) – Specifies whether the configuration should be saved upon auto-sync.

  • type (pulumi.Input[str]) – Specifies if the device-group will be used for failover or resource syncing

The devices object supports the following:

  • name (pulumi.Input[str]) - Is the name of the device Group

  • setSyncLeader (pulumi.Input[bool])

translate_output_property(prop)

Provides subclasses of Resource an opportunity to translate names of output properties into a format of their choosing before writing those properties to the resource object.

Parameters

prop (str) – A property name.

Returns

A potentially transformed property name.

Return type

str

translate_input_property(prop)

Provides subclasses of Resource an opportunity to translate names of input properties into a format of their choosing before sending those properties to the Pulumi engine.

Parameters

prop (str) – A property name.

Returns

A potentially transformed property name.

Return type

str