Azure Native

v1.88.1 published on Thursday, Dec 1, 2022 by Pulumi

getService

Service resource. API Version: 2022-04-01-preview.

Using getService

Two invocation forms are available. The direct form accepts plain arguments and either blocks until the result value is available, or returns a Promise-wrapped result. The output form accepts Input-wrapped arguments and returns an Output-wrapped result.

function getService(args: GetServiceArgs, opts?: InvokeOptions): Promise<GetServiceResult>
function getServiceOutput(args: GetServiceOutputArgs, opts?: InvokeOptions): Output<GetServiceResult>
def get_service(mobile_network_name: Optional[str] = None,
                resource_group_name: Optional[str] = None,
                service_name: Optional[str] = None,
                opts: Optional[InvokeOptions] = None) -> GetServiceResult
def get_service_output(mobile_network_name: Optional[pulumi.Input[str]] = None,
                resource_group_name: Optional[pulumi.Input[str]] = None,
                service_name: Optional[pulumi.Input[str]] = None,
                opts: Optional[InvokeOptions] = None) -> Output[GetServiceResult]
func LookupService(ctx *Context, args *LookupServiceArgs, opts ...InvokeOption) (*LookupServiceResult, error)
func LookupServiceOutput(ctx *Context, args *LookupServiceOutputArgs, opts ...InvokeOption) LookupServiceResultOutput

> Note: This function is named LookupService in the Go SDK.

public static class GetService 
{
    public static Task<GetServiceResult> InvokeAsync(GetServiceArgs args, InvokeOptions? opts = null)
    public static Output<GetServiceResult> Invoke(GetServiceInvokeArgs args, InvokeOptions? opts = null)
}
public static CompletableFuture<GetServiceResult> getService(GetServiceArgs args, InvokeOptions options)
// Output-based functions aren't available in Java yet
fn::invoke:
  function: azure-native:mobilenetwork:getService
  arguments:
    # arguments dictionary

The following arguments are supported:

MobileNetworkName string

The name of the mobile network.

ResourceGroupName string

The name of the resource group. The name is case insensitive.

ServiceName string

The name of the service. You must not use any of the following reserved strings - default, requested or service

MobileNetworkName string

The name of the mobile network.

ResourceGroupName string

The name of the resource group. The name is case insensitive.

ServiceName string

The name of the service. You must not use any of the following reserved strings - default, requested or service

mobileNetworkName String

The name of the mobile network.

resourceGroupName String

The name of the resource group. The name is case insensitive.

serviceName String

The name of the service. You must not use any of the following reserved strings - default, requested or service

mobileNetworkName string

The name of the mobile network.

resourceGroupName string

The name of the resource group. The name is case insensitive.

serviceName string

The name of the service. You must not use any of the following reserved strings - default, requested or service

mobile_network_name str

The name of the mobile network.

resource_group_name str

The name of the resource group. The name is case insensitive.

service_name str

The name of the service. You must not use any of the following reserved strings - default, requested or service

mobileNetworkName String

The name of the mobile network.

resourceGroupName String

The name of the resource group. The name is case insensitive.

serviceName String

The name of the service. You must not use any of the following reserved strings - default, requested or service

getService Result

The following output properties are available:

Id string

Fully qualified resource ID for the resource. Ex - /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/{resourceType}/{resourceName}

Location string

The geo-location where the resource lives

Name string

The name of the resource

PccRules List<Pulumi.AzureNative.MobileNetwork.Outputs.PccRuleConfigurationResponse>

The set of data flow policy rules that make up this service.

ProvisioningState string

The provisioning state of the service resource.

ServicePrecedence int

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

SystemData Pulumi.AzureNative.MobileNetwork.Outputs.SystemDataResponse

Azure Resource Manager metadata containing createdBy and modifiedBy information.

Type string

The type of the resource. E.g. "Microsoft.Compute/virtualMachines" or "Microsoft.Storage/storageAccounts"

CreatedAt string

The timestamp of resource creation (UTC).

CreatedBy string

The identity that created the resource.

CreatedByType string

The type of identity that created the resource.

LastModifiedAt string

The timestamp of resource last modification (UTC)

LastModifiedBy string

The identity that last modified the resource.

LastModifiedByType string

The type of identity that last modified the resource.

ServiceQosPolicy Pulumi.AzureNative.MobileNetwork.Outputs.QosPolicyResponse

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings.

Tags Dictionary<string, string>

Resource tags.

Id string

Fully qualified resource ID for the resource. Ex - /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/{resourceType}/{resourceName}

Location string

The geo-location where the resource lives

Name string

The name of the resource

PccRules []PccRuleConfigurationResponse

The set of data flow policy rules that make up this service.

ProvisioningState string

The provisioning state of the service resource.

ServicePrecedence int

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

SystemData SystemDataResponse

Azure Resource Manager metadata containing createdBy and modifiedBy information.

Type string

The type of the resource. E.g. "Microsoft.Compute/virtualMachines" or "Microsoft.Storage/storageAccounts"

CreatedAt string

The timestamp of resource creation (UTC).

CreatedBy string

The identity that created the resource.

CreatedByType string

The type of identity that created the resource.

LastModifiedAt string

The timestamp of resource last modification (UTC)

LastModifiedBy string

The identity that last modified the resource.

LastModifiedByType string

The type of identity that last modified the resource.

ServiceQosPolicy QosPolicyResponse

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings.

Tags map[string]string

Resource tags.

id String

Fully qualified resource ID for the resource. Ex - /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/{resourceType}/{resourceName}

location String

The geo-location where the resource lives

name String

The name of the resource

pccRules List<PccRuleConfigurationResponse>

The set of data flow policy rules that make up this service.

provisioningState String

The provisioning state of the service resource.

servicePrecedence Integer

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

systemData SystemDataResponse

Azure Resource Manager metadata containing createdBy and modifiedBy information.

type String

The type of the resource. E.g. "Microsoft.Compute/virtualMachines" or "Microsoft.Storage/storageAccounts"

createdAt String

The timestamp of resource creation (UTC).

createdBy String

The identity that created the resource.

createdByType String

The type of identity that created the resource.

lastModifiedAt String

The timestamp of resource last modification (UTC)

lastModifiedBy String

The identity that last modified the resource.

lastModifiedByType String

The type of identity that last modified the resource.

serviceQosPolicy QosPolicyResponse

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings.

tags Map<String,String>

Resource tags.

id string

Fully qualified resource ID for the resource. Ex - /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/{resourceType}/{resourceName}

location string

The geo-location where the resource lives

name string

The name of the resource

pccRules PccRuleConfigurationResponse[]

The set of data flow policy rules that make up this service.

provisioningState string

The provisioning state of the service resource.

servicePrecedence number

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

systemData SystemDataResponse

Azure Resource Manager metadata containing createdBy and modifiedBy information.

type string

The type of the resource. E.g. "Microsoft.Compute/virtualMachines" or "Microsoft.Storage/storageAccounts"

createdAt string

The timestamp of resource creation (UTC).

createdBy string

The identity that created the resource.

createdByType string

The type of identity that created the resource.

lastModifiedAt string

The timestamp of resource last modification (UTC)

lastModifiedBy string

The identity that last modified the resource.

lastModifiedByType string

The type of identity that last modified the resource.

serviceQosPolicy QosPolicyResponse

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings.

tags {[key: string]: string}

Resource tags.

id str

Fully qualified resource ID for the resource. Ex - /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/{resourceType}/{resourceName}

location str

The geo-location where the resource lives

name str

The name of the resource

pcc_rules Sequence[PccRuleConfigurationResponse]

The set of data flow policy rules that make up this service.

provisioning_state str

The provisioning state of the service resource.

service_precedence int

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

system_data SystemDataResponse

Azure Resource Manager metadata containing createdBy and modifiedBy information.

type str

The type of the resource. E.g. "Microsoft.Compute/virtualMachines" or "Microsoft.Storage/storageAccounts"

created_at str

The timestamp of resource creation (UTC).

created_by str

The identity that created the resource.

created_by_type str

The type of identity that created the resource.

last_modified_at str

The timestamp of resource last modification (UTC)

last_modified_by str

The identity that last modified the resource.

last_modified_by_type str

The type of identity that last modified the resource.

service_qos_policy QosPolicyResponse

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings.

tags Mapping[str, str]

Resource tags.

id String

Fully qualified resource ID for the resource. Ex - /subscriptions/{subscriptionId}/resourceGroups/{resourceGroupName}/providers/{resourceProviderNamespace}/{resourceType}/{resourceName}

location String

The geo-location where the resource lives

name String

The name of the resource

pccRules List<Property Map>

The set of data flow policy rules that make up this service.

provisioningState String

The provisioning state of the service resource.

servicePrecedence Number

A precedence value that is used to decide between services when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all services configured in the mobile network.

systemData Property Map

Azure Resource Manager metadata containing createdBy and modifiedBy information.

type String

The type of the resource. E.g. "Microsoft.Compute/virtualMachines" or "Microsoft.Storage/storageAccounts"

createdAt String

The timestamp of resource creation (UTC).

createdBy String

The identity that created the resource.

createdByType String

The type of identity that created the resource.

lastModifiedAt String

The timestamp of resource last modification (UTC)

lastModifiedBy String

The identity that last modified the resource.

lastModifiedByType String

The type of identity that last modified the resource.

serviceQosPolicy Property Map

The QoS policy to use for packets matching this service. This can be overridden for particular flows using the ruleQosPolicy field in a PccRuleConfiguration. If this field is null then the UE's SIM policy will define the QoS settings.

tags Map<String>

Resource tags.

Supporting Types

AmbrResponse

Downlink string

Downlink bit rate.

Uplink string

Uplink bit rate.

Downlink string

Downlink bit rate.

Uplink string

Uplink bit rate.

downlink String

Downlink bit rate.

uplink String

Uplink bit rate.

downlink string

Downlink bit rate.

uplink string

Uplink bit rate.

downlink str

Downlink bit rate.

uplink str

Uplink bit rate.

downlink String

Downlink bit rate.

uplink String

Uplink bit rate.

PccRuleConfigurationResponse

RuleName string

The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - default, requested or service.

RulePrecedence int

A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.

ServiceDataFlowTemplates List<Pulumi.AzureNative.MobileNetwork.Inputs.ServiceDataFlowTemplateResponse>

The set of data flow templates to use for this data flow policy rule.

RuleQosPolicy Pulumi.AzureNative.MobileNetwork.Inputs.PccRuleQosPolicyResponse

The QoS policy to use for packets matching this rule. If this field is null then the parent service will define the QoS settings.

TrafficControl string

Determines whether flows that match this data flow policy rule are permitted.

RuleName string

The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - default, requested or service.

RulePrecedence int

A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.

ServiceDataFlowTemplates []ServiceDataFlowTemplateResponse

The set of data flow templates to use for this data flow policy rule.

RuleQosPolicy PccRuleQosPolicyResponse

The QoS policy to use for packets matching this rule. If this field is null then the parent service will define the QoS settings.

TrafficControl string

Determines whether flows that match this data flow policy rule are permitted.

ruleName String

The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - default, requested or service.

rulePrecedence Integer

A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.

serviceDataFlowTemplates List<ServiceDataFlowTemplateResponse>

The set of data flow templates to use for this data flow policy rule.

ruleQosPolicy PccRuleQosPolicyResponse

The QoS policy to use for packets matching this rule. If this field is null then the parent service will define the QoS settings.

trafficControl String

Determines whether flows that match this data flow policy rule are permitted.

ruleName string

The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - default, requested or service.

rulePrecedence number

A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.

serviceDataFlowTemplates ServiceDataFlowTemplateResponse[]

The set of data flow templates to use for this data flow policy rule.

ruleQosPolicy PccRuleQosPolicyResponse

The QoS policy to use for packets matching this rule. If this field is null then the parent service will define the QoS settings.

trafficControl string

Determines whether flows that match this data flow policy rule are permitted.

rule_name str

The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - default, requested or service.

rule_precedence int

A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.

service_data_flow_templates Sequence[ServiceDataFlowTemplateResponse]

The set of data flow templates to use for this data flow policy rule.

rule_qos_policy PccRuleQosPolicyResponse

The QoS policy to use for packets matching this rule. If this field is null then the parent service will define the QoS settings.

traffic_control str

Determines whether flows that match this data flow policy rule are permitted.

ruleName String

The name of the rule. This must be unique within the parent service. You must not use any of the following reserved strings - default, requested or service.

rulePrecedence Number

A precedence value that is used to decide between data flow policy rules when identifying the QoS values to use for a particular SIM. A lower value means a higher priority. This value should be unique among all data flow policy rules configured in the mobile network.

serviceDataFlowTemplates List<Property Map>

The set of data flow templates to use for this data flow policy rule.

ruleQosPolicy Property Map

The QoS policy to use for packets matching this rule. If this field is null then the parent service will define the QoS settings.

trafficControl String

Determines whether flows that match this data flow policy rule are permitted.

PccRuleQosPolicyResponse

MaximumBitRate Pulumi.AzureNative.MobileNetwork.Inputs.AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

AllocationAndRetentionPriorityLevel int

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

FiveQi int

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

GuaranteedBitRate Pulumi.AzureNative.MobileNetwork.Inputs.AmbrResponse

The guaranteed bit rate (GBR) for all service data flows that use this data flow policy rule. This is an optional setting. If you do not provide a value, there will be no GBR set for the data flow policy rule that uses this QoS definition.

PreemptionCapability string

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

PreemptionVulnerability string

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

MaximumBitRate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

AllocationAndRetentionPriorityLevel int

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

FiveQi int

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

GuaranteedBitRate AmbrResponse

The guaranteed bit rate (GBR) for all service data flows that use this data flow policy rule. This is an optional setting. If you do not provide a value, there will be no GBR set for the data flow policy rule that uses this QoS definition.

PreemptionCapability string

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

PreemptionVulnerability string

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximumBitRate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocationAndRetentionPriorityLevel Integer

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

fiveQi Integer

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

guaranteedBitRate AmbrResponse

The guaranteed bit rate (GBR) for all service data flows that use this data flow policy rule. This is an optional setting. If you do not provide a value, there will be no GBR set for the data flow policy rule that uses this QoS definition.

preemptionCapability String

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemptionVulnerability String

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximumBitRate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocationAndRetentionPriorityLevel number

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

fiveQi number

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

guaranteedBitRate AmbrResponse

The guaranteed bit rate (GBR) for all service data flows that use this data flow policy rule. This is an optional setting. If you do not provide a value, there will be no GBR set for the data flow policy rule that uses this QoS definition.

preemptionCapability string

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemptionVulnerability string

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximum_bit_rate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocation_and_retention_priority_level int

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

five_qi int

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

guaranteed_bit_rate AmbrResponse

The guaranteed bit rate (GBR) for all service data flows that use this data flow policy rule. This is an optional setting. If you do not provide a value, there will be no GBR set for the data flow policy rule that uses this QoS definition.

preemption_capability str

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemption_vulnerability str

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximumBitRate Property Map

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocationAndRetentionPriorityLevel Number

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

fiveQi Number

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

guaranteedBitRate Property Map

The guaranteed bit rate (GBR) for all service data flows that use this data flow policy rule. This is an optional setting. If you do not provide a value, there will be no GBR set for the data flow policy rule that uses this QoS definition.

preemptionCapability String

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemptionVulnerability String

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

QosPolicyResponse

MaximumBitRate Pulumi.AzureNative.MobileNetwork.Inputs.AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

AllocationAndRetentionPriorityLevel int

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

FiveQi int

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

PreemptionCapability string

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

PreemptionVulnerability string

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

MaximumBitRate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

AllocationAndRetentionPriorityLevel int

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

FiveQi int

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

PreemptionCapability string

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

PreemptionVulnerability string

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximumBitRate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocationAndRetentionPriorityLevel Integer

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

fiveQi Integer

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

preemptionCapability String

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemptionVulnerability String

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximumBitRate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocationAndRetentionPriorityLevel number

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

fiveQi number

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

preemptionCapability string

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemptionVulnerability string

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximum_bit_rate AmbrResponse

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocation_and_retention_priority_level int

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

five_qi int

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

preemption_capability str

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemption_vulnerability str

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

maximumBitRate Property Map

The maximum bit rate (MBR) for all service data flows that use this data flow policy rule or service.

allocationAndRetentionPriorityLevel Number

QoS Flow allocation and retention priority (ARP) level. Flows with higher priority preempt flows with lower priority, if the settings of preemptionCapability and preemptionVulnerability allow it. 1 is the highest level of priority. If this field is not specified then 5qi is used to derive the ARP value. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

fiveQi Number

QoS Flow 5G QoS Indicator value. The 5QI identifies a specific QoS forwarding treatment to be provided to a flow. This must not be a standardized 5QI value corresponding to a GBR (guaranteed bit rate) QoS Flow. The illegal GBR 5QI values are: 1, 2, 3, 4, 65, 66, 67, 71, 72, 73, 74, 75, 76, 82, 83, 84, and 85. See 3GPP TS23.501 section 5.7.2.1 for a full description of the 5QI parameter, and table 5.7.4-1 for the definition of which are the GBR 5QI values.

preemptionCapability String

QoS Flow preemption capability. The preemption capability of a QoS Flow controls whether it can preempt another QoS Flow with a lower priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

preemptionVulnerability String

QoS Flow preemption vulnerability. The preemption vulnerability of a QoS Flow controls whether it can be preempted by a QoS Flow with a higher priority level. See 3GPP TS23.501 section 5.7.2.2 for a full description of the ARP parameters.

ServiceDataFlowTemplateResponse

Direction string

The direction of this flow.

Protocol List<string>

A list of the allowed protocol(s) for this flow. If you want this flow to be able to use any protocol within the internet protocol suite, use the value ip. If you only want to allow a selection of protocols, you must use the corresponding IANA Assigned Internet Protocol Number for each protocol, as described in https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml. For example, for UDP, you must use 17. If you use the value ip then you must leave the field port unspecified.

RemoteIpList List<string>

The remote IP address(es) to which UEs will connect for this flow. If you want to allow connections on any IP address, use the value any. Otherwise, you must provide each of the remote IP addresses to which the packet core instance will connect for this flow. You must provide each IP address in CIDR notation, including the netmask (for example, 192.0.2.54/24).

TemplateName string

The name of the data flow template. This must be unique within the parent data flow policy rule. You must not use any of the following reserved strings - default, requested or service.

Ports List<string>

The port(s) to which UEs will connect for this flow. You can specify zero or more ports or port ranges. If you specify one or more ports or port ranges then you must specify a value other than ip in the protocol field. This is an optional setting. If you do not specify it then connections will be allowed on all ports. Port ranges must be specified as -. For example: [8080, 8082-8085].

Direction string

The direction of this flow.

Protocol []string

A list of the allowed protocol(s) for this flow. If you want this flow to be able to use any protocol within the internet protocol suite, use the value ip. If you only want to allow a selection of protocols, you must use the corresponding IANA Assigned Internet Protocol Number for each protocol, as described in https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml. For example, for UDP, you must use 17. If you use the value ip then you must leave the field port unspecified.

RemoteIpList []string

The remote IP address(es) to which UEs will connect for this flow. If you want to allow connections on any IP address, use the value any. Otherwise, you must provide each of the remote IP addresses to which the packet core instance will connect for this flow. You must provide each IP address in CIDR notation, including the netmask (for example, 192.0.2.54/24).

TemplateName string

The name of the data flow template. This must be unique within the parent data flow policy rule. You must not use any of the following reserved strings - default, requested or service.

Ports []string

The port(s) to which UEs will connect for this flow. You can specify zero or more ports or port ranges. If you specify one or more ports or port ranges then you must specify a value other than ip in the protocol field. This is an optional setting. If you do not specify it then connections will be allowed on all ports. Port ranges must be specified as -. For example: [8080, 8082-8085].

direction String

The direction of this flow.

protocol List<String>

A list of the allowed protocol(s) for this flow. If you want this flow to be able to use any protocol within the internet protocol suite, use the value ip. If you only want to allow a selection of protocols, you must use the corresponding IANA Assigned Internet Protocol Number for each protocol, as described in https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml. For example, for UDP, you must use 17. If you use the value ip then you must leave the field port unspecified.

remoteIpList List<String>

The remote IP address(es) to which UEs will connect for this flow. If you want to allow connections on any IP address, use the value any. Otherwise, you must provide each of the remote IP addresses to which the packet core instance will connect for this flow. You must provide each IP address in CIDR notation, including the netmask (for example, 192.0.2.54/24).

templateName String

The name of the data flow template. This must be unique within the parent data flow policy rule. You must not use any of the following reserved strings - default, requested or service.

ports List<String>

The port(s) to which UEs will connect for this flow. You can specify zero or more ports or port ranges. If you specify one or more ports or port ranges then you must specify a value other than ip in the protocol field. This is an optional setting. If you do not specify it then connections will be allowed on all ports. Port ranges must be specified as -. For example: [8080, 8082-8085].

direction string

The direction of this flow.

protocol string[]

A list of the allowed protocol(s) for this flow. If you want this flow to be able to use any protocol within the internet protocol suite, use the value ip. If you only want to allow a selection of protocols, you must use the corresponding IANA Assigned Internet Protocol Number for each protocol, as described in https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml. For example, for UDP, you must use 17. If you use the value ip then you must leave the field port unspecified.

remoteIpList string[]

The remote IP address(es) to which UEs will connect for this flow. If you want to allow connections on any IP address, use the value any. Otherwise, you must provide each of the remote IP addresses to which the packet core instance will connect for this flow. You must provide each IP address in CIDR notation, including the netmask (for example, 192.0.2.54/24).

templateName string

The name of the data flow template. This must be unique within the parent data flow policy rule. You must not use any of the following reserved strings - default, requested or service.

ports string[]

The port(s) to which UEs will connect for this flow. You can specify zero or more ports or port ranges. If you specify one or more ports or port ranges then you must specify a value other than ip in the protocol field. This is an optional setting. If you do not specify it then connections will be allowed on all ports. Port ranges must be specified as -. For example: [8080, 8082-8085].

direction str

The direction of this flow.

protocol Sequence[str]

A list of the allowed protocol(s) for this flow. If you want this flow to be able to use any protocol within the internet protocol suite, use the value ip. If you only want to allow a selection of protocols, you must use the corresponding IANA Assigned Internet Protocol Number for each protocol, as described in https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml. For example, for UDP, you must use 17. If you use the value ip then you must leave the field port unspecified.

remote_ip_list Sequence[str]

The remote IP address(es) to which UEs will connect for this flow. If you want to allow connections on any IP address, use the value any. Otherwise, you must provide each of the remote IP addresses to which the packet core instance will connect for this flow. You must provide each IP address in CIDR notation, including the netmask (for example, 192.0.2.54/24).

template_name str

The name of the data flow template. This must be unique within the parent data flow policy rule. You must not use any of the following reserved strings - default, requested or service.

ports Sequence[str]

The port(s) to which UEs will connect for this flow. You can specify zero or more ports or port ranges. If you specify one or more ports or port ranges then you must specify a value other than ip in the protocol field. This is an optional setting. If you do not specify it then connections will be allowed on all ports. Port ranges must be specified as -. For example: [8080, 8082-8085].

direction String

The direction of this flow.

protocol List<String>

A list of the allowed protocol(s) for this flow. If you want this flow to be able to use any protocol within the internet protocol suite, use the value ip. If you only want to allow a selection of protocols, you must use the corresponding IANA Assigned Internet Protocol Number for each protocol, as described in https://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml. For example, for UDP, you must use 17. If you use the value ip then you must leave the field port unspecified.

remoteIpList List<String>

The remote IP address(es) to which UEs will connect for this flow. If you want to allow connections on any IP address, use the value any. Otherwise, you must provide each of the remote IP addresses to which the packet core instance will connect for this flow. You must provide each IP address in CIDR notation, including the netmask (for example, 192.0.2.54/24).

templateName String

The name of the data flow template. This must be unique within the parent data flow policy rule. You must not use any of the following reserved strings - default, requested or service.

ports List<String>

The port(s) to which UEs will connect for this flow. You can specify zero or more ports or port ranges. If you specify one or more ports or port ranges then you must specify a value other than ip in the protocol field. This is an optional setting. If you do not specify it then connections will be allowed on all ports. Port ranges must be specified as -. For example: [8080, 8082-8085].

SystemDataResponse

CreatedAt string

The timestamp of resource creation (UTC).

CreatedBy string

The identity that created the resource.

CreatedByType string

The type of identity that created the resource.

LastModifiedAt string

The timestamp of resource last modification (UTC)

LastModifiedBy string

The identity that last modified the resource.

LastModifiedByType string

The type of identity that last modified the resource.

CreatedAt string

The timestamp of resource creation (UTC).

CreatedBy string

The identity that created the resource.

CreatedByType string

The type of identity that created the resource.

LastModifiedAt string

The timestamp of resource last modification (UTC)

LastModifiedBy string

The identity that last modified the resource.

LastModifiedByType string

The type of identity that last modified the resource.

createdAt String

The timestamp of resource creation (UTC).

createdBy String

The identity that created the resource.

createdByType String

The type of identity that created the resource.

lastModifiedAt String

The timestamp of resource last modification (UTC)

lastModifiedBy String

The identity that last modified the resource.

lastModifiedByType String

The type of identity that last modified the resource.

createdAt string

The timestamp of resource creation (UTC).

createdBy string

The identity that created the resource.

createdByType string

The type of identity that created the resource.

lastModifiedAt string

The timestamp of resource last modification (UTC)

lastModifiedBy string

The identity that last modified the resource.

lastModifiedByType string

The type of identity that last modified the resource.

created_at str

The timestamp of resource creation (UTC).

created_by str

The identity that created the resource.

created_by_type str

The type of identity that created the resource.

last_modified_at str

The timestamp of resource last modification (UTC)

last_modified_by str

The identity that last modified the resource.

last_modified_by_type str

The type of identity that last modified the resource.

createdAt String

The timestamp of resource creation (UTC).

createdBy String

The identity that created the resource.

createdByType String

The type of identity that created the resource.

lastModifiedAt String

The timestamp of resource last modification (UTC)

lastModifiedBy String

The identity that last modified the resource.

lastModifiedByType String

The type of identity that last modified the resource.

Package Details

Repository
https://github.com/pulumi/pulumi-azure-native
License
Apache-2.0