Docs Packages
  1. Packages
  2. Fortios
  3. API Docs
  4. firewall
  5. Policy46
Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

fortios.firewall.Policy46

Explore with Pulumi AI

fortios logo
Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
pulumiverse/pulumi-fortios

    Configure IPv4 to IPv6 policies. Applies to FortiOS Version <= 7.0.0.

    Example Usage

    import * as pulumi from "@pulumi/pulumi";
import * as fortios from "@pulumiverse/fortios";

const trnameVip46 = new fortios.firewall.Vip46("trnameVip46", {
    arpReply: "enable",
    color: 0,
    extip: "10.1.100.55",
    extport: "0-65535",
    fosid: 0,
    ldbMethod: "static",
    mappedip: "2000:172:16:200::55",
    mappedport: "0-65535",
    portforward: "disable",
    protocol: "tcp",
    type: "static-nat",
});
const trnamePolicy46 = new fortios.firewall.Policy46("trnamePolicy46", {
    action: "deny",
    dstintf: "port3",
    fixedport: "disable",
    ippool: "disable",
    logtraffic: "disable",
    permitAnyHost: "disable",
    policyid: 2,
    schedule: "always",
    srcintf: "port2",
    status: "enable",
    tcpMssReceiver: 0,
    tcpMssSender: 0,
    dstaddrs: [{
        name: trnameVip46.name,
    }],
    services: [{
        name: "ALL",
    }],
    srcaddrs: [{
        name: "FIREWALL_AUTH_PORTAL_ADDRESS",
    }],
});

    import pulumi
import pulumiverse_fortios as fortios

trname_vip46 = fortios.firewall.Vip46("trnameVip46",
    arp_reply="enable",
    color=0,
    extip="10.1.100.55",
    extport="0-65535",
    fosid=0,
    ldb_method="static",
    mappedip="2000:172:16:200::55",
    mappedport="0-65535",
    portforward="disable",
    protocol="tcp",
    type="static-nat")
trname_policy46 = fortios.firewall.Policy46("trnamePolicy46",
    action="deny",
    dstintf="port3",
    fixedport="disable",
    ippool="disable",
    logtraffic="disable",
    permit_any_host="disable",
    policyid=2,
    schedule="always",
    srcintf="port2",
    status="enable",
    tcp_mss_receiver=0,
    tcp_mss_sender=0,
    dstaddrs=[fortios.firewall.Policy46DstaddrArgs(
        name=trname_vip46.name,
    )],
    services=[fortios.firewall.Policy46ServiceArgs(
        name="ALL",
    )],
    srcaddrs=[fortios.firewall.Policy46SrcaddrArgs(
        name="FIREWALL_AUTH_PORTAL_ADDRESS",
    )])

    package main

import (
	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
	"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/firewall"
)

func main() {
	pulumi.Run(func(ctx *pulumi.Context) error {
		trnameVip46, err := firewall.NewVip46(ctx, "trnameVip46", &firewall.Vip46Args{
			ArpReply:    pulumi.String("enable"),
			Color:       pulumi.Int(0),
			Extip:       pulumi.String("10.1.100.55"),
			Extport:     pulumi.String("0-65535"),
			Fosid:       pulumi.Int(0),
			LdbMethod:   pulumi.String("static"),
			Mappedip:    pulumi.String("2000:172:16:200::55"),
			Mappedport:  pulumi.String("0-65535"),
			Portforward: pulumi.String("disable"),
			Protocol:    pulumi.String("tcp"),
			Type:        pulumi.String("static-nat"),
		})
		if err != nil {
			return err
		}
		_, err = firewall.NewPolicy46(ctx, "trnamePolicy46", &firewall.Policy46Args{
			Action:         pulumi.String("deny"),
			Dstintf:        pulumi.String("port3"),
			Fixedport:      pulumi.String("disable"),
			Ippool:         pulumi.String("disable"),
			Logtraffic:     pulumi.String("disable"),
			PermitAnyHost:  pulumi.String("disable"),
			Policyid:       pulumi.Int(2),
			Schedule:       pulumi.String("always"),
			Srcintf:        pulumi.String("port2"),
			Status:         pulumi.String("enable"),
			TcpMssReceiver: pulumi.Int(0),
			TcpMssSender:   pulumi.Int(0),
			Dstaddrs: firewall.Policy46DstaddrArray{
				&firewall.Policy46DstaddrArgs{
					Name: trnameVip46.Name,
				},
			},
			Services: firewall.Policy46ServiceArray{
				&firewall.Policy46ServiceArgs{
					Name: pulumi.String("ALL"),
				},
			},
			Srcaddrs: firewall.Policy46SrcaddrArray{
				&firewall.Policy46SrcaddrArgs{
					Name: pulumi.String("FIREWALL_AUTH_PORTAL_ADDRESS"),
				},
			},
		})
		if err != nil {
			return err
		}
		return nil
	})
}

    using System.Collections.Generic;
using System.Linq;
using Pulumi;
using Fortios = Pulumiverse.Fortios;

return await Deployment.RunAsync(() => 
{
    var trnameVip46 = new Fortios.Firewall.Vip46("trnameVip46", new()
    {
        ArpReply = "enable",
        Color = 0,
        Extip = "10.1.100.55",
        Extport = "0-65535",
        Fosid = 0,
        LdbMethod = "static",
        Mappedip = "2000:172:16:200::55",
        Mappedport = "0-65535",
        Portforward = "disable",
        Protocol = "tcp",
        Type = "static-nat",
    });

    var trnamePolicy46 = new Fortios.Firewall.Policy46("trnamePolicy46", new()
    {
        Action = "deny",
        Dstintf = "port3",
        Fixedport = "disable",
        Ippool = "disable",
        Logtraffic = "disable",
        PermitAnyHost = "disable",
        Policyid = 2,
        Schedule = "always",
        Srcintf = "port2",
        Status = "enable",
        TcpMssReceiver = 0,
        TcpMssSender = 0,
        Dstaddrs = new[]
        {
            new Fortios.Firewall.Inputs.Policy46DstaddrArgs
            {
                Name = trnameVip46.Name,
            },
        },
        Services = new[]
        {
            new Fortios.Firewall.Inputs.Policy46ServiceArgs
            {
                Name = "ALL",
            },
        },
        Srcaddrs = new[]
        {
            new Fortios.Firewall.Inputs.Policy46SrcaddrArgs
            {
                Name = "FIREWALL_AUTH_PORTAL_ADDRESS",
            },
        },
    });

});

    package generated_program;

import com.pulumi.Context;
import com.pulumi.Pulumi;
import com.pulumi.core.Output;
import com.pulumi.fortios.firewall.Vip46;
import com.pulumi.fortios.firewall.Vip46Args;
import com.pulumi.fortios.firewall.Policy46;
import com.pulumi.fortios.firewall.Policy46Args;
import com.pulumi.fortios.firewall.inputs.Policy46DstaddrArgs;
import com.pulumi.fortios.firewall.inputs.Policy46ServiceArgs;
import com.pulumi.fortios.firewall.inputs.Policy46SrcaddrArgs;
import java.util.List;
import java.util.ArrayList;
import java.util.Map;
import java.io.File;
import java.nio.file.Files;
import java.nio.file.Paths;

public class App {
    public static void main(String[] args) {
        Pulumi.run(App::stack);
    }

    public static void stack(Context ctx) {
        var trnameVip46 = new Vip46("trnameVip46", Vip46Args.builder()
            .arpReply("enable")
            .color(0)
            .extip("10.1.100.55")
            .extport("0-65535")
            .fosid(0)
            .ldbMethod("static")
            .mappedip("2000:172:16:200::55")
            .mappedport("0-65535")
            .portforward("disable")
            .protocol("tcp")
            .type("static-nat")
            .build());

        var trnamePolicy46 = new Policy46("trnamePolicy46", Policy46Args.builder()
            .action("deny")
            .dstintf("port3")
            .fixedport("disable")
            .ippool("disable")
            .logtraffic("disable")
            .permitAnyHost("disable")
            .policyid(2)
            .schedule("always")
            .srcintf("port2")
            .status("enable")
            .tcpMssReceiver(0)
            .tcpMssSender(0)
            .dstaddrs(Policy46DstaddrArgs.builder()
                .name(trnameVip46.name())
                .build())
            .services(Policy46ServiceArgs.builder()
                .name("ALL")
                .build())
            .srcaddrs(Policy46SrcaddrArgs.builder()
                .name("FIREWALL_AUTH_PORTAL_ADDRESS")
                .build())
            .build());

    }
}

    resources:
  trnameVip46:
    type: fortios:firewall:Vip46
    properties:
      arpReply: enable
      color: 0
      extip: 10.1.100.55
      extport: 0-65535
      fosid: 0
      ldbMethod: static
      mappedip: 2000:172:16:200::55
      mappedport: 0-65535
      portforward: disable
      protocol: tcp
      type: static-nat
  trnamePolicy46:
    type: fortios:firewall:Policy46
    properties:
      action: deny
      dstintf: port3
      fixedport: disable
      ippool: disable
      logtraffic: disable
      permitAnyHost: disable
      policyid: 2
      schedule: always
      srcintf: port2
      status: enable
      tcpMssReceiver: 0
      tcpMssSender: 0
      dstaddrs:
        - name: ${trnameVip46.name}
      services:
        - name: ALL
      srcaddrs:
        - name: FIREWALL_AUTH_PORTAL_ADDRESS

    Create Policy46 Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new Policy46(name: string, args: Policy46Args, opts?: CustomResourceOptions);
    @overload
def Policy46(resource_name: str,
             args: Policy46Args,
             opts: Optional[ResourceOptions] = None)

@overload
def Policy46(resource_name: str,
             opts: Optional[ResourceOptions] = None,
             schedule: Optional[str] = None,
             srcintf: Optional[str] = None,
             dstaddrs: Optional[Sequence[Policy46DstaddrArgs]] = None,
             dstintf: Optional[str] = None,
             srcaddrs: Optional[Sequence[Policy46SrcaddrArgs]] = None,
             get_all_tables: Optional[str] = None,
             services: Optional[Sequence[Policy46ServiceArgs]] = None,
             ippool: Optional[str] = None,
             logtraffic: Optional[str] = None,
             logtraffic_start: Optional[str] = None,
             name: Optional[str] = None,
             per_ip_shaper: Optional[str] = None,
             permit_any_host: Optional[str] = None,
             policyid: Optional[int] = None,
             poolnames: Optional[Sequence[Policy46PoolnameArgs]] = None,
             fixedport: Optional[str] = None,
             action: Optional[str] = None,
             dynamic_sort_subtable: Optional[str] = None,
             comments: Optional[str] = None,
             status: Optional[str] = None,
             tcp_mss_receiver: Optional[int] = None,
             tcp_mss_sender: Optional[int] = None,
             traffic_shaper: Optional[str] = None,
             traffic_shaper_reverse: Optional[str] = None,
             uuid: Optional[str] = None,
             vdomparam: Optional[str] = None)
    func NewPolicy46(ctx *Context, name string, args Policy46Args, opts ...ResourceOption) (*Policy46, error)
    public Policy46(string name, Policy46Args args, CustomResourceOptions? opts = null)
    public Policy46(String name, Policy46Args args)
public Policy46(String name, Policy46Args args, CustomResourceOptions options)

    type: fortios:firewall:Policy46
properties: # The arguments to resource properties.
options: # Bag of options to control resource's behavior.

    Parameters

    name string
    The unique name of the resource.
    args Policy46Args
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args Policy46Args
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args Policy46Args
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args Policy46Args
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args Policy46Args
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Constructor example

    The following reference example uses placeholder values for all input properties.

    var policy46Resource = new Fortios.Firewall.Policy46("policy46Resource", new()
{
    Schedule = "string",
    Srcintf = "string",
    Dstaddrs = new[]
    {
        new Fortios.Firewall.Inputs.Policy46DstaddrArgs
        {
            Name = "string",
        },
    },
    Dstintf = "string",
    Srcaddrs = new[]
    {
        new Fortios.Firewall.Inputs.Policy46SrcaddrArgs
        {
            Name = "string",
        },
    },
    GetAllTables = "string",
    Services = new[]
    {
        new Fortios.Firewall.Inputs.Policy46ServiceArgs
        {
            Name = "string",
        },
    },
    Ippool = "string",
    Logtraffic = "string",
    LogtrafficStart = "string",
    Name = "string",
    PerIpShaper = "string",
    PermitAnyHost = "string",
    Policyid = 0,
    Poolnames = new[]
    {
        new Fortios.Firewall.Inputs.Policy46PoolnameArgs
        {
            Name = "string",
        },
    },
    Fixedport = "string",
    Action = "string",
    DynamicSortSubtable = "string",
    Comments = "string",
    Status = "string",
    TcpMssReceiver = 0,
    TcpMssSender = 0,
    TrafficShaper = "string",
    TrafficShaperReverse = "string",
    Uuid = "string",
    Vdomparam = "string",
});

    example, err := firewall.NewPolicy46(ctx, "policy46Resource", &firewall.Policy46Args{
	Schedule: pulumi.String("string"),
	Srcintf:  pulumi.String("string"),
	Dstaddrs: firewall.Policy46DstaddrArray{
		&firewall.Policy46DstaddrArgs{
			Name: pulumi.String("string"),
		},
	},
	Dstintf: pulumi.String("string"),
	Srcaddrs: firewall.Policy46SrcaddrArray{
		&firewall.Policy46SrcaddrArgs{
			Name: pulumi.String("string"),
		},
	},
	GetAllTables: pulumi.String("string"),
	Services: firewall.Policy46ServiceArray{
		&firewall.Policy46ServiceArgs{
			Name: pulumi.String("string"),
		},
	},
	Ippool:          pulumi.String("string"),
	Logtraffic:      pulumi.String("string"),
	LogtrafficStart: pulumi.String("string"),
	Name:            pulumi.String("string"),
	PerIpShaper:     pulumi.String("string"),
	PermitAnyHost:   pulumi.String("string"),
	Policyid:        pulumi.Int(0),
	Poolnames: firewall.Policy46PoolnameArray{
		&firewall.Policy46PoolnameArgs{
			Name: pulumi.String("string"),
		},
	},
	Fixedport:            pulumi.String("string"),
	Action:               pulumi.String("string"),
	DynamicSortSubtable:  pulumi.String("string"),
	Comments:             pulumi.String("string"),
	Status:               pulumi.String("string"),
	TcpMssReceiver:       pulumi.Int(0),
	TcpMssSender:         pulumi.Int(0),
	TrafficShaper:        pulumi.String("string"),
	TrafficShaperReverse: pulumi.String("string"),
	Uuid:                 pulumi.String("string"),
	Vdomparam:            pulumi.String("string"),
})

    var policy46Resource = new Policy46("policy46Resource", Policy46Args.builder()
    .schedule("string")
    .srcintf("string")
    .dstaddrs(Policy46DstaddrArgs.builder()
        .name("string")
        .build())
    .dstintf("string")
    .srcaddrs(Policy46SrcaddrArgs.builder()
        .name("string")
        .build())
    .getAllTables("string")
    .services(Policy46ServiceArgs.builder()
        .name("string")
        .build())
    .ippool("string")
    .logtraffic("string")
    .logtrafficStart("string")
    .name("string")
    .perIpShaper("string")
    .permitAnyHost("string")
    .policyid(0)
    .poolnames(Policy46PoolnameArgs.builder()
        .name("string")
        .build())
    .fixedport("string")
    .action("string")
    .dynamicSortSubtable("string")
    .comments("string")
    .status("string")
    .tcpMssReceiver(0)
    .tcpMssSender(0)
    .trafficShaper("string")
    .trafficShaperReverse("string")
    .uuid("string")
    .vdomparam("string")
    .build());

    policy46_resource = fortios.firewall.Policy46("policy46Resource",
    schedule="string",
    srcintf="string",
    dstaddrs=[fortios.firewall.Policy46DstaddrArgs(
        name="string",
    )],
    dstintf="string",
    srcaddrs=[fortios.firewall.Policy46SrcaddrArgs(
        name="string",
    )],
    get_all_tables="string",
    services=[fortios.firewall.Policy46ServiceArgs(
        name="string",
    )],
    ippool="string",
    logtraffic="string",
    logtraffic_start="string",
    name="string",
    per_ip_shaper="string",
    permit_any_host="string",
    policyid=0,
    poolnames=[fortios.firewall.Policy46PoolnameArgs(
        name="string",
    )],
    fixedport="string",
    action="string",
    dynamic_sort_subtable="string",
    comments="string",
    status="string",
    tcp_mss_receiver=0,
    tcp_mss_sender=0,
    traffic_shaper="string",
    traffic_shaper_reverse="string",
    uuid="string",
    vdomparam="string")

    const policy46Resource = new fortios.firewall.Policy46("policy46Resource", {
    schedule: "string",
    srcintf: "string",
    dstaddrs: [{
        name: "string",
    }],
    dstintf: "string",
    srcaddrs: [{
        name: "string",
    }],
    getAllTables: "string",
    services: [{
        name: "string",
    }],
    ippool: "string",
    logtraffic: "string",
    logtrafficStart: "string",
    name: "string",
    perIpShaper: "string",
    permitAnyHost: "string",
    policyid: 0,
    poolnames: [{
        name: "string",
    }],
    fixedport: "string",
    action: "string",
    dynamicSortSubtable: "string",
    comments: "string",
    status: "string",
    tcpMssReceiver: 0,
    tcpMssSender: 0,
    trafficShaper: "string",
    trafficShaperReverse: "string",
    uuid: "string",
    vdomparam: "string",
});

    type: fortios:firewall:Policy46
properties:
    action: string
    comments: string
    dstaddrs:
        - name: string
    dstintf: string
    dynamicSortSubtable: string
    fixedport: string
    getAllTables: string
    ippool: string
    logtraffic: string
    logtrafficStart: string
    name: string
    perIpShaper: string
    permitAnyHost: string
    policyid: 0
    poolnames:
        - name: string
    schedule: string
    services:
        - name: string
    srcaddrs:
        - name: string
    srcintf: string
    status: string
    tcpMssReceiver: 0
    tcpMssSender: 0
    trafficShaper: string
    trafficShaperReverse: string
    uuid: string
    vdomparam: string

    Policy46 Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    The Policy46 resource accepts the following input properties:

    Dstaddrs List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Dstaddr>
    Destination address objects. The structure of dstaddr block is documented below.
    Dstintf string
    Destination interface name.
    Schedule string
    Schedule name.
    Srcaddrs List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Srcaddr>
    Source address objects. The structure of srcaddr block is documented below.
    Srcintf string
    Source interface name.
    Action string
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    Comments string
    Comment.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Fixedport string
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Ippool string
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    Logtraffic string
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    LogtrafficStart string
    Record logs when a session starts and ends. Valid values: enable, disable.
    Name string
    Policy name.
    PerIpShaper string
    Per IP traffic shaper.
    PermitAnyHost string
    Enable/disable allowing any host. Valid values: enable, disable.
    Policyid int
    Policy ID.
    Poolnames List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Poolname>
    IP Pool names. The structure of poolname block is documented below.
    Services List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Service>
    Service name. The structure of service block is documented below.
    Status string
    Enable/disable this policy. Valid values: enable, disable.
    TcpMssReceiver int
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    TcpMssSender int
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    TrafficShaper string
    Traffic shaper.
    TrafficShaperReverse string
    Reverse traffic shaper.
    Uuid string
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Dstaddrs []Policy46DstaddrArgs
    Destination address objects. The structure of dstaddr block is documented below.
    Dstintf string
    Destination interface name.
    Schedule string
    Schedule name.
    Srcaddrs []Policy46SrcaddrArgs
    Source address objects. The structure of srcaddr block is documented below.
    Srcintf string
    Source interface name.
    Action string
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    Comments string
    Comment.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Fixedport string
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Ippool string
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    Logtraffic string
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    LogtrafficStart string
    Record logs when a session starts and ends. Valid values: enable, disable.
    Name string
    Policy name.
    PerIpShaper string
    Per IP traffic shaper.
    PermitAnyHost string
    Enable/disable allowing any host. Valid values: enable, disable.
    Policyid int
    Policy ID.
    Poolnames []Policy46PoolnameArgs
    IP Pool names. The structure of poolname block is documented below.
    Services []Policy46ServiceArgs
    Service name. The structure of service block is documented below.
    Status string
    Enable/disable this policy. Valid values: enable, disable.
    TcpMssReceiver int
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    TcpMssSender int
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    TrafficShaper string
    Traffic shaper.
    TrafficShaperReverse string
    Reverse traffic shaper.
    Uuid string
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    dstaddrs List<Policy46Dstaddr>
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf String
    Destination interface name.
    schedule String
    Schedule name.
    srcaddrs List<Policy46Srcaddr>
    Source address objects. The structure of srcaddr block is documented below.
    srcintf String
    Source interface name.
    action String
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments String
    Comment.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport String
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool String
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic String
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtrafficStart String
    Record logs when a session starts and ends. Valid values: enable, disable.
    name String
    Policy name.
    perIpShaper String
    Per IP traffic shaper.
    permitAnyHost String
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid Integer
    Policy ID.
    poolnames List<Policy46Poolname>
    IP Pool names. The structure of poolname block is documented below.
    services List<Policy46Service>
    Service name. The structure of service block is documented below.
    status String
    Enable/disable this policy. Valid values: enable, disable.
    tcpMssReceiver Integer
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcpMssSender Integer
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    trafficShaper String
    Traffic shaper.
    trafficShaperReverse String
    Reverse traffic shaper.
    uuid String
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    dstaddrs Policy46Dstaddr[]
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf string
    Destination interface name.
    schedule string
    Schedule name.
    srcaddrs Policy46Srcaddr[]
    Source address objects. The structure of srcaddr block is documented below.
    srcintf string
    Source interface name.
    action string
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments string
    Comment.
    dynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport string
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    getAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool string
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic string
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtrafficStart string
    Record logs when a session starts and ends. Valid values: enable, disable.
    name string
    Policy name.
    perIpShaper string
    Per IP traffic shaper.
    permitAnyHost string
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid number
    Policy ID.
    poolnames Policy46Poolname[]
    IP Pool names. The structure of poolname block is documented below.
    services Policy46Service[]
    Service name. The structure of service block is documented below.
    status string
    Enable/disable this policy. Valid values: enable, disable.
    tcpMssReceiver number
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcpMssSender number
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    trafficShaper string
    Traffic shaper.
    trafficShaperReverse string
    Reverse traffic shaper.
    uuid string
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    dstaddrs Sequence[Policy46DstaddrArgs]
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf str
    Destination interface name.
    schedule str
    Schedule name.
    srcaddrs Sequence[Policy46SrcaddrArgs]
    Source address objects. The structure of srcaddr block is documented below.
    srcintf str
    Source interface name.
    action str
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments str
    Comment.
    dynamic_sort_subtable str
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport str
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    get_all_tables str
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool str
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic str
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtraffic_start str
    Record logs when a session starts and ends. Valid values: enable, disable.
    name str
    Policy name.
    per_ip_shaper str
    Per IP traffic shaper.
    permit_any_host str
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid int
    Policy ID.
    poolnames Sequence[Policy46PoolnameArgs]
    IP Pool names. The structure of poolname block is documented below.
    services Sequence[Policy46ServiceArgs]
    Service name. The structure of service block is documented below.
    status str
    Enable/disable this policy. Valid values: enable, disable.
    tcp_mss_receiver int
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcp_mss_sender int
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    traffic_shaper str
    Traffic shaper.
    traffic_shaper_reverse str
    Reverse traffic shaper.
    uuid str
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    dstaddrs List<Property Map>
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf String
    Destination interface name.
    schedule String
    Schedule name.
    srcaddrs List<Property Map>
    Source address objects. The structure of srcaddr block is documented below.
    srcintf String
    Source interface name.
    action String
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments String
    Comment.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport String
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool String
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic String
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtrafficStart String
    Record logs when a session starts and ends. Valid values: enable, disable.
    name String
    Policy name.
    perIpShaper String
    Per IP traffic shaper.
    permitAnyHost String
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid Number
    Policy ID.
    poolnames List<Property Map>
    IP Pool names. The structure of poolname block is documented below.
    services List<Property Map>
    Service name. The structure of service block is documented below.
    status String
    Enable/disable this policy. Valid values: enable, disable.
    tcpMssReceiver Number
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcpMssSender Number
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    trafficShaper String
    Traffic shaper.
    trafficShaperReverse String
    Reverse traffic shaper.
    uuid String
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the Policy46 resource produces the following output properties:

    Id string
    The provider-assigned unique ID for this managed resource.
    Id string
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.
    id string
    The provider-assigned unique ID for this managed resource.
    id str
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.

    Look up Existing Policy46 Resource

    Get an existing Policy46 resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: Policy46State, opts?: CustomResourceOptions): Policy46
    @staticmethod
def get(resource_name: str,
        id: str,
        opts: Optional[ResourceOptions] = None,
        action: Optional[str] = None,
        comments: Optional[str] = None,
        dstaddrs: Optional[Sequence[Policy46DstaddrArgs]] = None,
        dstintf: Optional[str] = None,
        dynamic_sort_subtable: Optional[str] = None,
        fixedport: Optional[str] = None,
        get_all_tables: Optional[str] = None,
        ippool: Optional[str] = None,
        logtraffic: Optional[str] = None,
        logtraffic_start: Optional[str] = None,
        name: Optional[str] = None,
        per_ip_shaper: Optional[str] = None,
        permit_any_host: Optional[str] = None,
        policyid: Optional[int] = None,
        poolnames: Optional[Sequence[Policy46PoolnameArgs]] = None,
        schedule: Optional[str] = None,
        services: Optional[Sequence[Policy46ServiceArgs]] = None,
        srcaddrs: Optional[Sequence[Policy46SrcaddrArgs]] = None,
        srcintf: Optional[str] = None,
        status: Optional[str] = None,
        tcp_mss_receiver: Optional[int] = None,
        tcp_mss_sender: Optional[int] = None,
        traffic_shaper: Optional[str] = None,
        traffic_shaper_reverse: Optional[str] = None,
        uuid: Optional[str] = None,
        vdomparam: Optional[str] = None) -> Policy46
    func GetPolicy46(ctx *Context, name string, id IDInput, state *Policy46State, opts ...ResourceOption) (*Policy46, error)
    public static Policy46 Get(string name, Input<string> id, Policy46State? state, CustomResourceOptions? opts = null)
    public static Policy46 get(String name, Output<String> id, Policy46State state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    Action string
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    Comments string
    Comment.
    Dstaddrs List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Dstaddr>
    Destination address objects. The structure of dstaddr block is documented below.
    Dstintf string
    Destination interface name.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Fixedport string
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Ippool string
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    Logtraffic string
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    LogtrafficStart string
    Record logs when a session starts and ends. Valid values: enable, disable.
    Name string
    Policy name.
    PerIpShaper string
    Per IP traffic shaper.
    PermitAnyHost string
    Enable/disable allowing any host. Valid values: enable, disable.
    Policyid int
    Policy ID.
    Poolnames List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Poolname>
    IP Pool names. The structure of poolname block is documented below.
    Schedule string
    Schedule name.
    Services List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Service>
    Service name. The structure of service block is documented below.
    Srcaddrs List<Pulumiverse.Fortios.Firewall.Inputs.Policy46Srcaddr>
    Source address objects. The structure of srcaddr block is documented below.
    Srcintf string
    Source interface name.
    Status string
    Enable/disable this policy. Valid values: enable, disable.
    TcpMssReceiver int
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    TcpMssSender int
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    TrafficShaper string
    Traffic shaper.
    TrafficShaperReverse string
    Reverse traffic shaper.
    Uuid string
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Action string
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    Comments string
    Comment.
    Dstaddrs []Policy46DstaddrArgs
    Destination address objects. The structure of dstaddr block is documented below.
    Dstintf string
    Destination interface name.
    DynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    Fixedport string
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    GetAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    Ippool string
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    Logtraffic string
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    LogtrafficStart string
    Record logs when a session starts and ends. Valid values: enable, disable.
    Name string
    Policy name.
    PerIpShaper string
    Per IP traffic shaper.
    PermitAnyHost string
    Enable/disable allowing any host. Valid values: enable, disable.
    Policyid int
    Policy ID.
    Poolnames []Policy46PoolnameArgs
    IP Pool names. The structure of poolname block is documented below.
    Schedule string
    Schedule name.
    Services []Policy46ServiceArgs
    Service name. The structure of service block is documented below.
    Srcaddrs []Policy46SrcaddrArgs
    Source address objects. The structure of srcaddr block is documented below.
    Srcintf string
    Source interface name.
    Status string
    Enable/disable this policy. Valid values: enable, disable.
    TcpMssReceiver int
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    TcpMssSender int
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    TrafficShaper string
    Traffic shaper.
    TrafficShaperReverse string
    Reverse traffic shaper.
    Uuid string
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action String
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments String
    Comment.
    dstaddrs List<Policy46Dstaddr>
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf String
    Destination interface name.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport String
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool String
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic String
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtrafficStart String
    Record logs when a session starts and ends. Valid values: enable, disable.
    name String
    Policy name.
    perIpShaper String
    Per IP traffic shaper.
    permitAnyHost String
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid Integer
    Policy ID.
    poolnames List<Policy46Poolname>
    IP Pool names. The structure of poolname block is documented below.
    schedule String
    Schedule name.
    services List<Policy46Service>
    Service name. The structure of service block is documented below.
    srcaddrs List<Policy46Srcaddr>
    Source address objects. The structure of srcaddr block is documented below.
    srcintf String
    Source interface name.
    status String
    Enable/disable this policy. Valid values: enable, disable.
    tcpMssReceiver Integer
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcpMssSender Integer
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    trafficShaper String
    Traffic shaper.
    trafficShaperReverse String
    Reverse traffic shaper.
    uuid String
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action string
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments string
    Comment.
    dstaddrs Policy46Dstaddr[]
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf string
    Destination interface name.
    dynamicSortSubtable string
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport string
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    getAllTables string
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool string
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic string
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtrafficStart string
    Record logs when a session starts and ends. Valid values: enable, disable.
    name string
    Policy name.
    perIpShaper string
    Per IP traffic shaper.
    permitAnyHost string
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid number
    Policy ID.
    poolnames Policy46Poolname[]
    IP Pool names. The structure of poolname block is documented below.
    schedule string
    Schedule name.
    services Policy46Service[]
    Service name. The structure of service block is documented below.
    srcaddrs Policy46Srcaddr[]
    Source address objects. The structure of srcaddr block is documented below.
    srcintf string
    Source interface name.
    status string
    Enable/disable this policy. Valid values: enable, disable.
    tcpMssReceiver number
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcpMssSender number
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    trafficShaper string
    Traffic shaper.
    trafficShaperReverse string
    Reverse traffic shaper.
    uuid string
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action str
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments str
    Comment.
    dstaddrs Sequence[Policy46DstaddrArgs]
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf str
    Destination interface name.
    dynamic_sort_subtable str
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport str
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    get_all_tables str
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool str
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic str
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtraffic_start str
    Record logs when a session starts and ends. Valid values: enable, disable.
    name str
    Policy name.
    per_ip_shaper str
    Per IP traffic shaper.
    permit_any_host str
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid int
    Policy ID.
    poolnames Sequence[Policy46PoolnameArgs]
    IP Pool names. The structure of poolname block is documented below.
    schedule str
    Schedule name.
    services Sequence[Policy46ServiceArgs]
    Service name. The structure of service block is documented below.
    srcaddrs Sequence[Policy46SrcaddrArgs]
    Source address objects. The structure of srcaddr block is documented below.
    srcintf str
    Source interface name.
    status str
    Enable/disable this policy. Valid values: enable, disable.
    tcp_mss_receiver int
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcp_mss_sender int
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    traffic_shaper str
    Traffic shaper.
    traffic_shaper_reverse str
    Reverse traffic shaper.
    uuid str
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    action String
    Accept or deny traffic matching the policy. Valid values: accept, deny.
    comments String
    Comment.
    dstaddrs List<Property Map>
    Destination address objects. The structure of dstaddr block is documented below.
    dstintf String
    Destination interface name.
    dynamicSortSubtable String
    Sort sub-tables, please do not set this parameter when configuring static sub-tables. Options: [ false, true, natural, alphabetical ]. false: Default value, do not sort tables; true/natural: sort tables in natural order. For example: [ a10, a2 ] -> [ a2, a10 ]; alphabetical: sort tables in alphabetical order. For example: [ a10, a2 ] -> [ a10, a2 ].
    fixedport String
    Enable/disable fixed port for this policy. Valid values: enable, disable.
    getAllTables String
    Get all sub-tables including unconfigured tables. Do not set this variable to true if you configure sub-table in another resource, otherwise, conflicts and overwrite will occur. Options: [ false, true ]. false: Default value, do not get unconfigured tables; true: get all tables including unconfigured tables.
    ippool String
    Enable/disable use of IP Pools for source NAT. Valid values: enable, disable.
    logtraffic String
    Enable/disable traffic logging for this policy. Valid values: enable, disable.
    logtrafficStart String
    Record logs when a session starts and ends. Valid values: enable, disable.
    name String
    Policy name.
    perIpShaper String
    Per IP traffic shaper.
    permitAnyHost String
    Enable/disable allowing any host. Valid values: enable, disable.
    policyid Number
    Policy ID.
    poolnames List<Property Map>
    IP Pool names. The structure of poolname block is documented below.
    schedule String
    Schedule name.
    services List<Property Map>
    Service name. The structure of service block is documented below.
    srcaddrs List<Property Map>
    Source address objects. The structure of srcaddr block is documented below.
    srcintf String
    Source interface name.
    status String
    Enable/disable this policy. Valid values: enable, disable.
    tcpMssReceiver Number
    TCP Maximum Segment Size value of receiver (0 - 65535, default = 0)
    tcpMssSender Number
    TCP Maximum Segment Size value of sender (0 - 65535, default = 0).
    trafficShaper String
    Traffic shaper.
    trafficShaperReverse String
    Reverse traffic shaper.
    uuid String
    Universally Unique Identifier (UUID; automatically assigned but can be manually reset).
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Supporting Types

    Policy46Dstaddr, Policy46DstaddrArgs

    Name string
    Address name.
    Name string
    Address name.
    name String
    Address name.
    name string
    Address name.
    name str
    Address name.
    name String
    Address name.

    Policy46Poolname, Policy46PoolnameArgs

    Name string
    IP pool name.
    Name string
    IP pool name.
    name String
    IP pool name.
    name string
    IP pool name.
    name str
    IP pool name.
    name String
    IP pool name.

    Policy46Service, Policy46ServiceArgs

    Name string
    Service name.
    Name string
    Service name.
    name String
    Service name.
    name string
    Service name.
    name str
    Service name.
    name String
    Service name.

    Policy46Srcaddr, Policy46SrcaddrArgs

    Name string
    Address name.
    Name string
    Address name.
    name String
    Address name.
    name string
    Address name.
    name str
    Address name.
    name String
    Address name.

    Import

    Firewall Policy46 can be imported using any of these accepted formats:

    $ pulumi import fortios:firewall/policy46:Policy46 labelname {{policyid}}

    If you do not want to import arguments of block:

    $ export “FORTIOS_IMPORT_TABLE”=“false”

    $ pulumi import fortios:firewall/policy46:Policy46 labelname {{policyid}}

    $ unset “FORTIOS_IMPORT_TABLE”

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    fortios pulumiverse/pulumi-fortios
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the fortios Terraform Provider.
    fortios logo
    Fortios v0.0.6 published on Tuesday, Jul 9, 2024 by pulumiverse
    pulumiverse/pulumi-fortios