1. Packages
  2. Fortios
  3. API Docs
  4. vpn
  5. vpn/ipsec
  6. Forticlient
Fortios v0.0.5 published on Tuesday, Apr 9, 2024 by pulumiverse

fortios.vpn/ipsec.Forticlient

Explore with Pulumi AI

fortios logo
Fortios v0.0.5 published on Tuesday, Apr 9, 2024 by pulumiverse

    Configure FortiClient policy realm.

    Example Usage

    import * as pulumi from "@pulumi/pulumi";
    import * as fortios from "@pulumiverse/fortios";
    
    // fortios_vpnipsec_phase1interface.trname2:
    const trname4 = new fortios.vpn.ipsec.Phase1interface("trname4", {
        acctVerify: "disable",
        addGwRoute: "disable",
        addRoute: "enable",
        assignIp: "enable",
        assignIpFrom: "range",
        authmethod: "psk",
        authusrgrp: "Guest-group",
        autoDiscoveryForwarder: "disable",
        autoDiscoveryPsk: "disable",
        autoDiscoveryReceiver: "disable",
        autoDiscoverySender: "disable",
        autoNegotiate: "enable",
        certIdValidation: "enable",
        childlessIke: "disable",
        clientAutoNegotiate: "disable",
        clientKeepAlive: "disable",
        comments: "VPN: Dialup_IPsec (Created by VPN wizard)",
        defaultGw: "0.0.0.0",
        defaultGwPriority: 0,
        dhgrp: "14 5",
        digitalSignatureAuth: "disable",
        distance: 15,
        dnsMode: "auto",
        dpd: "on-idle",
        dpdRetrycount: 3,
        dpdRetryinterval: "60",
        eap: "disable",
        eapIdentity: "use-id-payload",
        encapLocalGw4: "0.0.0.0",
        encapLocalGw6: "::",
        encapRemoteGw4: "0.0.0.0",
        encapRemoteGw6: "::",
        encapsulation: "none",
        encapsulationAddress: "ike",
        enforceUniqueId: "disable",
        exchangeInterfaceIp: "disable",
        exchangeIpAddr4: "0.0.0.0",
        exchangeIpAddr6: "::",
        forticlientEnforcement: "disable",
        fragmentation: "enable",
        fragmentationMtu: 1200,
        groupAuthentication: "disable",
        haSyncEspSeqno: "enable",
        idleTimeout: "disable",
        idleTimeoutinterval: 15,
        ikeVersion: "1",
        includeLocalLan: "disable",
        "interface": "port4",
        ipVersion: "4",
        ipv4DnsServer1: "0.0.0.0",
        ipv4DnsServer2: "0.0.0.0",
        ipv4DnsServer3: "0.0.0.0",
        ipv4EndIp: "10.10.10.10",
        ipv4Netmask: "255.255.255.192",
        ipv4SplitInclude: "FIREWALL_AUTH_PORTAL_ADDRESS",
        ipv4StartIp: "10.10.10.1",
        ipv4WinsServer1: "0.0.0.0",
        ipv4WinsServer2: "0.0.0.0",
        ipv6DnsServer1: "::",
        ipv6DnsServer2: "::",
        ipv6DnsServer3: "::",
        ipv6EndIp: "::",
        ipv6Prefix: 128,
        ipv6StartIp: "::",
        keepalive: 10,
        keylife: 86400,
        localGw: "0.0.0.0",
        localGw6: "::",
        localidType: "auto",
        meshSelectorType: "disable",
        mode: "aggressive",
        modeCfg: "enable",
        monitorHoldDownDelay: 0,
        monitorHoldDownTime: "00:00",
        monitorHoldDownType: "immediate",
        monitorHoldDownWeekday: "sunday",
        nattraversal: "enable",
        negotiateTimeout: 30,
        netDevice: "enable",
        passiveMode: "disable",
        peertype: "any",
        psksecret: "NCIEW32930293203932",
        ppk: "disable",
        priority: 0,
        proposal: "aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
        reauth: "disable",
        rekey: "enable",
        remoteGw: "0.0.0.0",
        remoteGw6: "::",
        rsaSignatureFormat: "pkcs1",
        savePassword: "enable",
        sendCertChain: "enable",
        signatureHashAlg: "sha2-512 sha2-384 sha2-256 sha1",
        suiteB: "disable",
        tunnelSearch: "selectors",
        type: "dynamic",
        unitySupport: "enable",
        wizardType: "dialup-forticlient",
        xauthtype: "auto",
    });
    // fortios_vpnipsec_phase2interface.trname1:
    const trname3 = new fortios.vpn.ipsec.Phase2interface("trname3", {
        addRoute: "phase1",
        autoDiscoveryForwarder: "phase1",
        autoDiscoverySender: "phase1",
        autoNegotiate: "disable",
        dhcpIpsec: "disable",
        dhgrp: "14 5",
        dstAddrType: "subnet",
        dstEndIp: "0.0.0.0",
        dstEndIp6: "::",
        dstPort: 0,
        dstStartIp: "0.0.0.0",
        dstStartIp6: "::",
        dstSubnet: "0.0.0.0 0.0.0.0",
        dstSubnet6: "::/0",
        encapsulation: "tunnel-mode",
        keepalive: "disable",
        keylifeType: "seconds",
        keylifekbs: 5120,
        keylifeseconds: 43200,
        l2tp: "disable",
        pfs: "enable",
        phase1name: trname4.name,
        proposal: "aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
        protocol: 0,
        replay: "enable",
        routeOverlap: "use-new",
        singleSource: "disable",
        srcAddrType: "subnet",
        srcEndIp: "0.0.0.0",
        srcEndIp6: "::",
        srcPort: 0,
        srcStartIp: "0.0.0.0",
        srcStartIp6: "::",
        srcSubnet: "0.0.0.0 0.0.0.0",
        srcSubnet6: "::/0",
    });
    const trname = new fortios.vpn.ipsec.Forticlient("trname", {
        phase2name: trname3.name,
        realm: "1",
        status: "enable",
        usergroupname: "Guest-group",
    });
    
    import pulumi
    import pulumiverse_fortios as fortios
    
    # fortios_vpnipsec_phase1interface.trname2:
    trname4 = fortios.vpn.ipsec.Phase1interface("trname4",
        acct_verify="disable",
        add_gw_route="disable",
        add_route="enable",
        assign_ip="enable",
        assign_ip_from="range",
        authmethod="psk",
        authusrgrp="Guest-group",
        auto_discovery_forwarder="disable",
        auto_discovery_psk="disable",
        auto_discovery_receiver="disable",
        auto_discovery_sender="disable",
        auto_negotiate="enable",
        cert_id_validation="enable",
        childless_ike="disable",
        client_auto_negotiate="disable",
        client_keep_alive="disable",
        comments="VPN: Dialup_IPsec (Created by VPN wizard)",
        default_gw="0.0.0.0",
        default_gw_priority=0,
        dhgrp="14 5",
        digital_signature_auth="disable",
        distance=15,
        dns_mode="auto",
        dpd="on-idle",
        dpd_retrycount=3,
        dpd_retryinterval="60",
        eap="disable",
        eap_identity="use-id-payload",
        encap_local_gw4="0.0.0.0",
        encap_local_gw6="::",
        encap_remote_gw4="0.0.0.0",
        encap_remote_gw6="::",
        encapsulation="none",
        encapsulation_address="ike",
        enforce_unique_id="disable",
        exchange_interface_ip="disable",
        exchange_ip_addr4="0.0.0.0",
        exchange_ip_addr6="::",
        forticlient_enforcement="disable",
        fragmentation="enable",
        fragmentation_mtu=1200,
        group_authentication="disable",
        ha_sync_esp_seqno="enable",
        idle_timeout="disable",
        idle_timeoutinterval=15,
        ike_version="1",
        include_local_lan="disable",
        interface="port4",
        ip_version="4",
        ipv4_dns_server1="0.0.0.0",
        ipv4_dns_server2="0.0.0.0",
        ipv4_dns_server3="0.0.0.0",
        ipv4_end_ip="10.10.10.10",
        ipv4_netmask="255.255.255.192",
        ipv4_split_include="FIREWALL_AUTH_PORTAL_ADDRESS",
        ipv4_start_ip="10.10.10.1",
        ipv4_wins_server1="0.0.0.0",
        ipv4_wins_server2="0.0.0.0",
        ipv6_dns_server1="::",
        ipv6_dns_server2="::",
        ipv6_dns_server3="::",
        ipv6_end_ip="::",
        ipv6_prefix=128,
        ipv6_start_ip="::",
        keepalive=10,
        keylife=86400,
        local_gw="0.0.0.0",
        local_gw6="::",
        localid_type="auto",
        mesh_selector_type="disable",
        mode="aggressive",
        mode_cfg="enable",
        monitor_hold_down_delay=0,
        monitor_hold_down_time="00:00",
        monitor_hold_down_type="immediate",
        monitor_hold_down_weekday="sunday",
        nattraversal="enable",
        negotiate_timeout=30,
        net_device="enable",
        passive_mode="disable",
        peertype="any",
        psksecret="NCIEW32930293203932",
        ppk="disable",
        priority=0,
        proposal="aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
        reauth="disable",
        rekey="enable",
        remote_gw="0.0.0.0",
        remote_gw6="::",
        rsa_signature_format="pkcs1",
        save_password="enable",
        send_cert_chain="enable",
        signature_hash_alg="sha2-512 sha2-384 sha2-256 sha1",
        suite_b="disable",
        tunnel_search="selectors",
        type="dynamic",
        unity_support="enable",
        wizard_type="dialup-forticlient",
        xauthtype="auto")
    # fortios_vpnipsec_phase2interface.trname1:
    trname3 = fortios.vpn.ipsec.Phase2interface("trname3",
        add_route="phase1",
        auto_discovery_forwarder="phase1",
        auto_discovery_sender="phase1",
        auto_negotiate="disable",
        dhcp_ipsec="disable",
        dhgrp="14 5",
        dst_addr_type="subnet",
        dst_end_ip="0.0.0.0",
        dst_end_ip6="::",
        dst_port=0,
        dst_start_ip="0.0.0.0",
        dst_start_ip6="::",
        dst_subnet="0.0.0.0 0.0.0.0",
        dst_subnet6="::/0",
        encapsulation="tunnel-mode",
        keepalive="disable",
        keylife_type="seconds",
        keylifekbs=5120,
        keylifeseconds=43200,
        l2tp="disable",
        pfs="enable",
        phase1name=trname4.name,
        proposal="aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
        protocol=0,
        replay="enable",
        route_overlap="use-new",
        single_source="disable",
        src_addr_type="subnet",
        src_end_ip="0.0.0.0",
        src_end_ip6="::",
        src_port=0,
        src_start_ip="0.0.0.0",
        src_start_ip6="::",
        src_subnet="0.0.0.0 0.0.0.0",
        src_subnet6="::/0")
    trname = fortios.vpn.ipsec.Forticlient("trname",
        phase2name=trname3.name,
        realm="1",
        status="enable",
        usergroupname="Guest-group")
    
    package main
    
    import (
    	"github.com/pulumi/pulumi/sdk/v3/go/pulumi"
    	"github.com/pulumiverse/pulumi-fortios/sdk/go/fortios/vpn"
    )
    
    func main() {
    	pulumi.Run(func(ctx *pulumi.Context) error {
    		// fortios_vpnipsec_phase1interface.trname2:
    		trname4, err := vpn.NewPhase1interface(ctx, "trname4", &vpn.Phase1interfaceArgs{
    			AcctVerify:             pulumi.String("disable"),
    			AddGwRoute:             pulumi.String("disable"),
    			AddRoute:               pulumi.String("enable"),
    			AssignIp:               pulumi.String("enable"),
    			AssignIpFrom:           pulumi.String("range"),
    			Authmethod:             pulumi.String("psk"),
    			Authusrgrp:             pulumi.String("Guest-group"),
    			AutoDiscoveryForwarder: pulumi.String("disable"),
    			AutoDiscoveryPsk:       pulumi.String("disable"),
    			AutoDiscoveryReceiver:  pulumi.String("disable"),
    			AutoDiscoverySender:    pulumi.String("disable"),
    			AutoNegotiate:          pulumi.String("enable"),
    			CertIdValidation:       pulumi.String("enable"),
    			ChildlessIke:           pulumi.String("disable"),
    			ClientAutoNegotiate:    pulumi.String("disable"),
    			ClientKeepAlive:        pulumi.String("disable"),
    			Comments:               pulumi.String("VPN: Dialup_IPsec (Created by VPN wizard)"),
    			DefaultGw:              pulumi.String("0.0.0.0"),
    			DefaultGwPriority:      pulumi.Int(0),
    			Dhgrp:                  pulumi.String("14 5"),
    			DigitalSignatureAuth:   pulumi.String("disable"),
    			Distance:               pulumi.Int(15),
    			DnsMode:                pulumi.String("auto"),
    			Dpd:                    pulumi.String("on-idle"),
    			DpdRetrycount:          pulumi.Int(3),
    			DpdRetryinterval:       pulumi.String("60"),
    			Eap:                    pulumi.String("disable"),
    			EapIdentity:            pulumi.String("use-id-payload"),
    			EncapLocalGw4:          pulumi.String("0.0.0.0"),
    			EncapLocalGw6:          pulumi.String("::"),
    			EncapRemoteGw4:         pulumi.String("0.0.0.0"),
    			EncapRemoteGw6:         pulumi.String("::"),
    			Encapsulation:          pulumi.String("none"),
    			EncapsulationAddress:   pulumi.String("ike"),
    			EnforceUniqueId:        pulumi.String("disable"),
    			ExchangeInterfaceIp:    pulumi.String("disable"),
    			ExchangeIpAddr4:        pulumi.String("0.0.0.0"),
    			ExchangeIpAddr6:        pulumi.String("::"),
    			ForticlientEnforcement: pulumi.String("disable"),
    			Fragmentation:          pulumi.String("enable"),
    			FragmentationMtu:       pulumi.Int(1200),
    			GroupAuthentication:    pulumi.String("disable"),
    			HaSyncEspSeqno:         pulumi.String("enable"),
    			IdleTimeout:            pulumi.String("disable"),
    			IdleTimeoutinterval:    pulumi.Int(15),
    			IkeVersion:             pulumi.String("1"),
    			IncludeLocalLan:        pulumi.String("disable"),
    			Interface:              pulumi.String("port4"),
    			IpVersion:              pulumi.String("4"),
    			Ipv4DnsServer1:         pulumi.String("0.0.0.0"),
    			Ipv4DnsServer2:         pulumi.String("0.0.0.0"),
    			Ipv4DnsServer3:         pulumi.String("0.0.0.0"),
    			Ipv4EndIp:              pulumi.String("10.10.10.10"),
    			Ipv4Netmask:            pulumi.String("255.255.255.192"),
    			Ipv4SplitInclude:       pulumi.String("FIREWALL_AUTH_PORTAL_ADDRESS"),
    			Ipv4StartIp:            pulumi.String("10.10.10.1"),
    			Ipv4WinsServer1:        pulumi.String("0.0.0.0"),
    			Ipv4WinsServer2:        pulumi.String("0.0.0.0"),
    			Ipv6DnsServer1:         pulumi.String("::"),
    			Ipv6DnsServer2:         pulumi.String("::"),
    			Ipv6DnsServer3:         pulumi.String("::"),
    			Ipv6EndIp:              pulumi.String("::"),
    			Ipv6Prefix:             pulumi.Int(128),
    			Ipv6StartIp:            pulumi.String("::"),
    			Keepalive:              pulumi.Int(10),
    			Keylife:                pulumi.Int(86400),
    			LocalGw:                pulumi.String("0.0.0.0"),
    			LocalGw6:               pulumi.String("::"),
    			LocalidType:            pulumi.String("auto"),
    			MeshSelectorType:       pulumi.String("disable"),
    			Mode:                   pulumi.String("aggressive"),
    			ModeCfg:                pulumi.String("enable"),
    			MonitorHoldDownDelay:   pulumi.Int(0),
    			MonitorHoldDownTime:    pulumi.String("00:00"),
    			MonitorHoldDownType:    pulumi.String("immediate"),
    			MonitorHoldDownWeekday: pulumi.String("sunday"),
    			Nattraversal:           pulumi.String("enable"),
    			NegotiateTimeout:       pulumi.Int(30),
    			NetDevice:              pulumi.String("enable"),
    			PassiveMode:            pulumi.String("disable"),
    			Peertype:               pulumi.String("any"),
    			Psksecret:              pulumi.String("NCIEW32930293203932"),
    			Ppk:                    pulumi.String("disable"),
    			Priority:               pulumi.Int(0),
    			Proposal:               pulumi.String("aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1"),
    			Reauth:                 pulumi.String("disable"),
    			Rekey:                  pulumi.String("enable"),
    			RemoteGw:               pulumi.String("0.0.0.0"),
    			RemoteGw6:              pulumi.String("::"),
    			RsaSignatureFormat:     pulumi.String("pkcs1"),
    			SavePassword:           pulumi.String("enable"),
    			SendCertChain:          pulumi.String("enable"),
    			SignatureHashAlg:       pulumi.String("sha2-512 sha2-384 sha2-256 sha1"),
    			SuiteB:                 pulumi.String("disable"),
    			TunnelSearch:           pulumi.String("selectors"),
    			Type:                   pulumi.String("dynamic"),
    			UnitySupport:           pulumi.String("enable"),
    			WizardType:             pulumi.String("dialup-forticlient"),
    			Xauthtype:              pulumi.String("auto"),
    		})
    		if err != nil {
    			return err
    		}
    		// fortios_vpnipsec_phase2interface.trname1:
    		trname3, err := vpn.NewPhase2interface(ctx, "trname3", &vpn.Phase2interfaceArgs{
    			AddRoute:               pulumi.String("phase1"),
    			AutoDiscoveryForwarder: pulumi.String("phase1"),
    			AutoDiscoverySender:    pulumi.String("phase1"),
    			AutoNegotiate:          pulumi.String("disable"),
    			DhcpIpsec:              pulumi.String("disable"),
    			Dhgrp:                  pulumi.String("14 5"),
    			DstAddrType:            pulumi.String("subnet"),
    			DstEndIp:               pulumi.String("0.0.0.0"),
    			DstEndIp6:              pulumi.String("::"),
    			DstPort:                pulumi.Int(0),
    			DstStartIp:             pulumi.String("0.0.0.0"),
    			DstStartIp6:            pulumi.String("::"),
    			DstSubnet:              pulumi.String("0.0.0.0 0.0.0.0"),
    			DstSubnet6:             pulumi.String("::/0"),
    			Encapsulation:          pulumi.String("tunnel-mode"),
    			Keepalive:              pulumi.String("disable"),
    			KeylifeType:            pulumi.String("seconds"),
    			Keylifekbs:             pulumi.Int(5120),
    			Keylifeseconds:         pulumi.Int(43200),
    			L2tp:                   pulumi.String("disable"),
    			Pfs:                    pulumi.String("enable"),
    			Phase1name:             trname4.Name,
    			Proposal:               pulumi.String("aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305"),
    			Protocol:               pulumi.Int(0),
    			Replay:                 pulumi.String("enable"),
    			RouteOverlap:           pulumi.String("use-new"),
    			SingleSource:           pulumi.String("disable"),
    			SrcAddrType:            pulumi.String("subnet"),
    			SrcEndIp:               pulumi.String("0.0.0.0"),
    			SrcEndIp6:              pulumi.String("::"),
    			SrcPort:                pulumi.Int(0),
    			SrcStartIp:             pulumi.String("0.0.0.0"),
    			SrcStartIp6:            pulumi.String("::"),
    			SrcSubnet:              pulumi.String("0.0.0.0 0.0.0.0"),
    			SrcSubnet6:             pulumi.String("::/0"),
    		})
    		if err != nil {
    			return err
    		}
    		_, err = vpn.NewForticlient(ctx, "trname", &vpn.ForticlientArgs{
    			Phase2name:    trname3.Name,
    			Realm:         pulumi.String("1"),
    			Status:        pulumi.String("enable"),
    			Usergroupname: pulumi.String("Guest-group"),
    		})
    		if err != nil {
    			return err
    		}
    		return nil
    	})
    }
    
    using System.Collections.Generic;
    using System.Linq;
    using Pulumi;
    using Fortios = Pulumiverse.Fortios;
    
    return await Deployment.RunAsync(() => 
    {
        // fortios_vpnipsec_phase1interface.trname2:
        var trname4 = new Fortios.Vpn.Ipsec.Phase1interface("trname4", new()
        {
            AcctVerify = "disable",
            AddGwRoute = "disable",
            AddRoute = "enable",
            AssignIp = "enable",
            AssignIpFrom = "range",
            Authmethod = "psk",
            Authusrgrp = "Guest-group",
            AutoDiscoveryForwarder = "disable",
            AutoDiscoveryPsk = "disable",
            AutoDiscoveryReceiver = "disable",
            AutoDiscoverySender = "disable",
            AutoNegotiate = "enable",
            CertIdValidation = "enable",
            ChildlessIke = "disable",
            ClientAutoNegotiate = "disable",
            ClientKeepAlive = "disable",
            Comments = "VPN: Dialup_IPsec (Created by VPN wizard)",
            DefaultGw = "0.0.0.0",
            DefaultGwPriority = 0,
            Dhgrp = "14 5",
            DigitalSignatureAuth = "disable",
            Distance = 15,
            DnsMode = "auto",
            Dpd = "on-idle",
            DpdRetrycount = 3,
            DpdRetryinterval = "60",
            Eap = "disable",
            EapIdentity = "use-id-payload",
            EncapLocalGw4 = "0.0.0.0",
            EncapLocalGw6 = "::",
            EncapRemoteGw4 = "0.0.0.0",
            EncapRemoteGw6 = "::",
            Encapsulation = "none",
            EncapsulationAddress = "ike",
            EnforceUniqueId = "disable",
            ExchangeInterfaceIp = "disable",
            ExchangeIpAddr4 = "0.0.0.0",
            ExchangeIpAddr6 = "::",
            ForticlientEnforcement = "disable",
            Fragmentation = "enable",
            FragmentationMtu = 1200,
            GroupAuthentication = "disable",
            HaSyncEspSeqno = "enable",
            IdleTimeout = "disable",
            IdleTimeoutinterval = 15,
            IkeVersion = "1",
            IncludeLocalLan = "disable",
            Interface = "port4",
            IpVersion = "4",
            Ipv4DnsServer1 = "0.0.0.0",
            Ipv4DnsServer2 = "0.0.0.0",
            Ipv4DnsServer3 = "0.0.0.0",
            Ipv4EndIp = "10.10.10.10",
            Ipv4Netmask = "255.255.255.192",
            Ipv4SplitInclude = "FIREWALL_AUTH_PORTAL_ADDRESS",
            Ipv4StartIp = "10.10.10.1",
            Ipv4WinsServer1 = "0.0.0.0",
            Ipv4WinsServer2 = "0.0.0.0",
            Ipv6DnsServer1 = "::",
            Ipv6DnsServer2 = "::",
            Ipv6DnsServer3 = "::",
            Ipv6EndIp = "::",
            Ipv6Prefix = 128,
            Ipv6StartIp = "::",
            Keepalive = 10,
            Keylife = 86400,
            LocalGw = "0.0.0.0",
            LocalGw6 = "::",
            LocalidType = "auto",
            MeshSelectorType = "disable",
            Mode = "aggressive",
            ModeCfg = "enable",
            MonitorHoldDownDelay = 0,
            MonitorHoldDownTime = "00:00",
            MonitorHoldDownType = "immediate",
            MonitorHoldDownWeekday = "sunday",
            Nattraversal = "enable",
            NegotiateTimeout = 30,
            NetDevice = "enable",
            PassiveMode = "disable",
            Peertype = "any",
            Psksecret = "NCIEW32930293203932",
            Ppk = "disable",
            Priority = 0,
            Proposal = "aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1",
            Reauth = "disable",
            Rekey = "enable",
            RemoteGw = "0.0.0.0",
            RemoteGw6 = "::",
            RsaSignatureFormat = "pkcs1",
            SavePassword = "enable",
            SendCertChain = "enable",
            SignatureHashAlg = "sha2-512 sha2-384 sha2-256 sha1",
            SuiteB = "disable",
            TunnelSearch = "selectors",
            Type = "dynamic",
            UnitySupport = "enable",
            WizardType = "dialup-forticlient",
            Xauthtype = "auto",
        });
    
        // fortios_vpnipsec_phase2interface.trname1:
        var trname3 = new Fortios.Vpn.Ipsec.Phase2interface("trname3", new()
        {
            AddRoute = "phase1",
            AutoDiscoveryForwarder = "phase1",
            AutoDiscoverySender = "phase1",
            AutoNegotiate = "disable",
            DhcpIpsec = "disable",
            Dhgrp = "14 5",
            DstAddrType = "subnet",
            DstEndIp = "0.0.0.0",
            DstEndIp6 = "::",
            DstPort = 0,
            DstStartIp = "0.0.0.0",
            DstStartIp6 = "::",
            DstSubnet = "0.0.0.0 0.0.0.0",
            DstSubnet6 = "::/0",
            Encapsulation = "tunnel-mode",
            Keepalive = "disable",
            KeylifeType = "seconds",
            Keylifekbs = 5120,
            Keylifeseconds = 43200,
            L2tp = "disable",
            Pfs = "enable",
            Phase1name = trname4.Name,
            Proposal = "aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305",
            Protocol = 0,
            Replay = "enable",
            RouteOverlap = "use-new",
            SingleSource = "disable",
            SrcAddrType = "subnet",
            SrcEndIp = "0.0.0.0",
            SrcEndIp6 = "::",
            SrcPort = 0,
            SrcStartIp = "0.0.0.0",
            SrcStartIp6 = "::",
            SrcSubnet = "0.0.0.0 0.0.0.0",
            SrcSubnet6 = "::/0",
        });
    
        var trname = new Fortios.Vpn.Ipsec.Forticlient("trname", new()
        {
            Phase2name = trname3.Name,
            Realm = "1",
            Status = "enable",
            Usergroupname = "Guest-group",
        });
    
    });
    
    package generated_program;
    
    import com.pulumi.Context;
    import com.pulumi.Pulumi;
    import com.pulumi.core.Output;
    import com.pulumi.fortios.vpn.Phase1interface;
    import com.pulumi.fortios.vpn.Phase1interfaceArgs;
    import com.pulumi.fortios.vpn.Phase2interface;
    import com.pulumi.fortios.vpn.Phase2interfaceArgs;
    import com.pulumi.fortios.vpn.Forticlient;
    import com.pulumi.fortios.vpn.ForticlientArgs;
    import java.util.List;
    import java.util.ArrayList;
    import java.util.Map;
    import java.io.File;
    import java.nio.file.Files;
    import java.nio.file.Paths;
    
    public class App {
        public static void main(String[] args) {
            Pulumi.run(App::stack);
        }
    
        public static void stack(Context ctx) {
            var trname4 = new Phase1interface("trname4", Phase1interfaceArgs.builder()        
                .acctVerify("disable")
                .addGwRoute("disable")
                .addRoute("enable")
                .assignIp("enable")
                .assignIpFrom("range")
                .authmethod("psk")
                .authusrgrp("Guest-group")
                .autoDiscoveryForwarder("disable")
                .autoDiscoveryPsk("disable")
                .autoDiscoveryReceiver("disable")
                .autoDiscoverySender("disable")
                .autoNegotiate("enable")
                .certIdValidation("enable")
                .childlessIke("disable")
                .clientAutoNegotiate("disable")
                .clientKeepAlive("disable")
                .comments("VPN: Dialup_IPsec (Created by VPN wizard)")
                .defaultGw("0.0.0.0")
                .defaultGwPriority(0)
                .dhgrp("14 5")
                .digitalSignatureAuth("disable")
                .distance(15)
                .dnsMode("auto")
                .dpd("on-idle")
                .dpdRetrycount(3)
                .dpdRetryinterval("60")
                .eap("disable")
                .eapIdentity("use-id-payload")
                .encapLocalGw4("0.0.0.0")
                .encapLocalGw6("::")
                .encapRemoteGw4("0.0.0.0")
                .encapRemoteGw6("::")
                .encapsulation("none")
                .encapsulationAddress("ike")
                .enforceUniqueId("disable")
                .exchangeInterfaceIp("disable")
                .exchangeIpAddr4("0.0.0.0")
                .exchangeIpAddr6("::")
                .forticlientEnforcement("disable")
                .fragmentation("enable")
                .fragmentationMtu(1200)
                .groupAuthentication("disable")
                .haSyncEspSeqno("enable")
                .idleTimeout("disable")
                .idleTimeoutinterval(15)
                .ikeVersion("1")
                .includeLocalLan("disable")
                .interface_("port4")
                .ipVersion("4")
                .ipv4DnsServer1("0.0.0.0")
                .ipv4DnsServer2("0.0.0.0")
                .ipv4DnsServer3("0.0.0.0")
                .ipv4EndIp("10.10.10.10")
                .ipv4Netmask("255.255.255.192")
                .ipv4SplitInclude("FIREWALL_AUTH_PORTAL_ADDRESS")
                .ipv4StartIp("10.10.10.1")
                .ipv4WinsServer1("0.0.0.0")
                .ipv4WinsServer2("0.0.0.0")
                .ipv6DnsServer1("::")
                .ipv6DnsServer2("::")
                .ipv6DnsServer3("::")
                .ipv6EndIp("::")
                .ipv6Prefix(128)
                .ipv6StartIp("::")
                .keepalive(10)
                .keylife(86400)
                .localGw("0.0.0.0")
                .localGw6("::")
                .localidType("auto")
                .meshSelectorType("disable")
                .mode("aggressive")
                .modeCfg("enable")
                .monitorHoldDownDelay(0)
                .monitorHoldDownTime("00:00")
                .monitorHoldDownType("immediate")
                .monitorHoldDownWeekday("sunday")
                .nattraversal("enable")
                .negotiateTimeout(30)
                .netDevice("enable")
                .passiveMode("disable")
                .peertype("any")
                .psksecret("NCIEW32930293203932")
                .ppk("disable")
                .priority(0)
                .proposal("aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1")
                .reauth("disable")
                .rekey("enable")
                .remoteGw("0.0.0.0")
                .remoteGw6("::")
                .rsaSignatureFormat("pkcs1")
                .savePassword("enable")
                .sendCertChain("enable")
                .signatureHashAlg("sha2-512 sha2-384 sha2-256 sha1")
                .suiteB("disable")
                .tunnelSearch("selectors")
                .type("dynamic")
                .unitySupport("enable")
                .wizardType("dialup-forticlient")
                .xauthtype("auto")
                .build());
    
            var trname3 = new Phase2interface("trname3", Phase2interfaceArgs.builder()        
                .addRoute("phase1")
                .autoDiscoveryForwarder("phase1")
                .autoDiscoverySender("phase1")
                .autoNegotiate("disable")
                .dhcpIpsec("disable")
                .dhgrp("14 5")
                .dstAddrType("subnet")
                .dstEndIp("0.0.0.0")
                .dstEndIp6("::")
                .dstPort(0)
                .dstStartIp("0.0.0.0")
                .dstStartIp6("::")
                .dstSubnet("0.0.0.0 0.0.0.0")
                .dstSubnet6("::/0")
                .encapsulation("tunnel-mode")
                .keepalive("disable")
                .keylifeType("seconds")
                .keylifekbs(5120)
                .keylifeseconds(43200)
                .l2tp("disable")
                .pfs("enable")
                .phase1name(trname4.name())
                .proposal("aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305")
                .protocol(0)
                .replay("enable")
                .routeOverlap("use-new")
                .singleSource("disable")
                .srcAddrType("subnet")
                .srcEndIp("0.0.0.0")
                .srcEndIp6("::")
                .srcPort(0)
                .srcStartIp("0.0.0.0")
                .srcStartIp6("::")
                .srcSubnet("0.0.0.0 0.0.0.0")
                .srcSubnet6("::/0")
                .build());
    
            var trname = new Forticlient("trname", ForticlientArgs.builder()        
                .phase2name(trname3.name())
                .realm("1")
                .status("enable")
                .usergroupname("Guest-group")
                .build());
    
        }
    }
    
    resources:
      # fortios_vpnipsec_phase1interface.trname2:
      trname4:
        type: fortios:vpn/ipsec:Phase1interface
        properties:
          acctVerify: disable
          addGwRoute: disable
          addRoute: enable
          assignIp: enable
          assignIpFrom: range
          authmethod: psk
          authusrgrp: Guest-group
          autoDiscoveryForwarder: disable
          autoDiscoveryPsk: disable
          autoDiscoveryReceiver: disable
          autoDiscoverySender: disable
          autoNegotiate: enable
          certIdValidation: enable
          childlessIke: disable
          clientAutoNegotiate: disable
          clientKeepAlive: disable
          comments: 'VPN: Dialup_IPsec (Created by VPN wizard)'
          defaultGw: 0.0.0.0
          defaultGwPriority: 0
          dhgrp: 14 5
          digitalSignatureAuth: disable
          distance: 15
          dnsMode: auto
          dpd: on-idle
          dpdRetrycount: 3
          dpdRetryinterval: '60'
          eap: disable
          eapIdentity: use-id-payload
          encapLocalGw4: 0.0.0.0
          encapLocalGw6: '::'
          encapRemoteGw4: 0.0.0.0
          encapRemoteGw6: '::'
          encapsulation: none
          encapsulationAddress: ike
          enforceUniqueId: disable
          exchangeInterfaceIp: disable
          exchangeIpAddr4: 0.0.0.0
          exchangeIpAddr6: '::'
          forticlientEnforcement: disable
          fragmentation: enable
          fragmentationMtu: 1200
          groupAuthentication: disable
          haSyncEspSeqno: enable
          idleTimeout: disable
          idleTimeoutinterval: 15
          ikeVersion: '1'
          includeLocalLan: disable
          interface: port4
          ipVersion: '4'
          ipv4DnsServer1: 0.0.0.0
          ipv4DnsServer2: 0.0.0.0
          ipv4DnsServer3: 0.0.0.0
          ipv4EndIp: 10.10.10.10
          ipv4Netmask: 255.255.255.192
          ipv4SplitInclude: FIREWALL_AUTH_PORTAL_ADDRESS
          ipv4StartIp: 10.10.10.1
          ipv4WinsServer1: 0.0.0.0
          ipv4WinsServer2: 0.0.0.0
          ipv6DnsServer1: '::'
          ipv6DnsServer2: '::'
          ipv6DnsServer3: '::'
          ipv6EndIp: '::'
          ipv6Prefix: 128
          ipv6StartIp: '::'
          keepalive: 10
          keylife: 86400
          localGw: 0.0.0.0
          localGw6: '::'
          localidType: auto
          meshSelectorType: disable
          mode: aggressive
          modeCfg: enable
          monitorHoldDownDelay: 0
          monitorHoldDownTime: 00:00
          monitorHoldDownType: immediate
          monitorHoldDownWeekday: sunday
          nattraversal: enable
          negotiateTimeout: 30
          netDevice: enable
          passiveMode: disable
          peertype: any
          psksecret: NCIEW32930293203932
          ppk: disable
          priority: 0
          proposal: aes128-sha256 aes256-sha256 aes128-sha1 aes256-sha1
          reauth: disable
          rekey: enable
          remoteGw: 0.0.0.0
          remoteGw6: '::'
          rsaSignatureFormat: pkcs1
          savePassword: enable
          sendCertChain: enable
          signatureHashAlg: sha2-512 sha2-384 sha2-256 sha1
          suiteB: disable
          tunnelSearch: selectors
          type: dynamic
          unitySupport: enable
          wizardType: dialup-forticlient
          xauthtype: auto
      # fortios_vpnipsec_phase2interface.trname1:
      trname3:
        type: fortios:vpn/ipsec:Phase2interface
        properties:
          addRoute: phase1
          autoDiscoveryForwarder: phase1
          autoDiscoverySender: phase1
          autoNegotiate: disable
          dhcpIpsec: disable
          dhgrp: 14 5
          dstAddrType: subnet
          dstEndIp: 0.0.0.0
          dstEndIp6: '::'
          dstPort: 0
          dstStartIp: 0.0.0.0
          dstStartIp6: '::'
          dstSubnet: 0.0.0.0 0.0.0.0
          dstSubnet6: ::/0
          encapsulation: tunnel-mode
          keepalive: disable
          keylifeType: seconds
          keylifekbs: 5120
          keylifeseconds: 43200
          l2tp: disable
          pfs: enable
          phase1name: ${trname4.name}
          proposal: aes128-sha1 aes256-sha1 aes128-sha256 aes256-sha256 aes128gcm aes256gcm chacha20poly1305
          protocol: 0
          replay: enable
          routeOverlap: use-new
          singleSource: disable
          srcAddrType: subnet
          srcEndIp: 0.0.0.0
          srcEndIp6: '::'
          srcPort: 0
          srcStartIp: 0.0.0.0
          srcStartIp6: '::'
          srcSubnet: 0.0.0.0 0.0.0.0
          srcSubnet6: ::/0
      trname:
        type: fortios:vpn/ipsec:Forticlient
        properties:
          phase2name: ${trname3.name}
          realm: '1'
          status: enable
          usergroupname: Guest-group
    

    Create Forticlient Resource

    Resources are created with functions called constructors. To learn more about declaring and configuring resources, see Resources.

    Constructor syntax

    new Forticlient(name: string, args: ForticlientArgs, opts?: CustomResourceOptions);
    @overload
    def Forticlient(resource_name: str,
                    args: ForticlientArgs,
                    opts: Optional[ResourceOptions] = None)
    
    @overload
    def Forticlient(resource_name: str,
                    opts: Optional[ResourceOptions] = None,
                    phase2name: Optional[str] = None,
                    usergroupname: Optional[str] = None,
                    realm: Optional[str] = None,
                    status: Optional[str] = None,
                    vdomparam: Optional[str] = None)
    func NewForticlient(ctx *Context, name string, args ForticlientArgs, opts ...ResourceOption) (*Forticlient, error)
    public Forticlient(string name, ForticlientArgs args, CustomResourceOptions? opts = null)
    public Forticlient(String name, ForticlientArgs args)
    public Forticlient(String name, ForticlientArgs args, CustomResourceOptions options)
    
    type: fortios:vpn/ipsec/forticlient:Forticlient
    properties: # The arguments to resource properties.
    options: # Bag of options to control resource's behavior.
    
    

    Parameters

    name string
    The unique name of the resource.
    args ForticlientArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    resource_name str
    The unique name of the resource.
    args ForticlientArgs
    The arguments to resource properties.
    opts ResourceOptions
    Bag of options to control resource's behavior.
    ctx Context
    Context object for the current deployment.
    name string
    The unique name of the resource.
    args ForticlientArgs
    The arguments to resource properties.
    opts ResourceOption
    Bag of options to control resource's behavior.
    name string
    The unique name of the resource.
    args ForticlientArgs
    The arguments to resource properties.
    opts CustomResourceOptions
    Bag of options to control resource's behavior.
    name String
    The unique name of the resource.
    args ForticlientArgs
    The arguments to resource properties.
    options CustomResourceOptions
    Bag of options to control resource's behavior.

    Example

    The following reference example uses placeholder values for all input properties.

    var forticlientResource = new Fortios.Vpn.Ipsec.Forticlient("forticlientResource", new()
    {
        Phase2name = "string",
        Usergroupname = "string",
        Realm = "string",
        Status = "string",
        Vdomparam = "string",
    });
    
    example, err := vpn.NewForticlient(ctx, "forticlientResource", &vpn.ForticlientArgs{
    	Phase2name:    pulumi.String("string"),
    	Usergroupname: pulumi.String("string"),
    	Realm:         pulumi.String("string"),
    	Status:        pulumi.String("string"),
    	Vdomparam:     pulumi.String("string"),
    })
    
    var forticlientResource = new Forticlient("forticlientResource", ForticlientArgs.builder()        
        .phase2name("string")
        .usergroupname("string")
        .realm("string")
        .status("string")
        .vdomparam("string")
        .build());
    
    forticlient_resource = fortios.vpn.ipsec.Forticlient("forticlientResource",
        phase2name="string",
        usergroupname="string",
        realm="string",
        status="string",
        vdomparam="string")
    
    const forticlientResource = new fortios.vpn.ipsec.Forticlient("forticlientResource", {
        phase2name: "string",
        usergroupname: "string",
        realm: "string",
        status: "string",
        vdomparam: "string",
    });
    
    Coming soon!
    

    Forticlient Resource Properties

    To learn more about resource properties and how to use them, see Inputs and Outputs in the Architecture and Concepts docs.

    Inputs

    The Forticlient resource accepts the following input properties:

    Phase2name string
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    Usergroupname string
    User group name for FortiClient users.
    Realm string
    FortiClient realm name.
    Status string
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Phase2name string
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    Usergroupname string
    User group name for FortiClient users.
    Realm string
    FortiClient realm name.
    Status string
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name String
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    usergroupname String
    User group name for FortiClient users.
    realm String
    FortiClient realm name.
    status String
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name string
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    usergroupname string
    User group name for FortiClient users.
    realm string
    FortiClient realm name.
    status string
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name str
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    usergroupname str
    User group name for FortiClient users.
    realm str
    FortiClient realm name.
    status str
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name String
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    usergroupname String
    User group name for FortiClient users.
    realm String
    FortiClient realm name.
    status String
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Outputs

    All input properties are implicitly available as output properties. Additionally, the Forticlient resource produces the following output properties:

    Id string
    The provider-assigned unique ID for this managed resource.
    Id string
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.
    id string
    The provider-assigned unique ID for this managed resource.
    id str
    The provider-assigned unique ID for this managed resource.
    id String
    The provider-assigned unique ID for this managed resource.

    Look up Existing Forticlient Resource

    Get an existing Forticlient resource’s state with the given name, ID, and optional extra properties used to qualify the lookup.

    public static get(name: string, id: Input<ID>, state?: ForticlientState, opts?: CustomResourceOptions): Forticlient
    @staticmethod
    def get(resource_name: str,
            id: str,
            opts: Optional[ResourceOptions] = None,
            phase2name: Optional[str] = None,
            realm: Optional[str] = None,
            status: Optional[str] = None,
            usergroupname: Optional[str] = None,
            vdomparam: Optional[str] = None) -> Forticlient
    func GetForticlient(ctx *Context, name string, id IDInput, state *ForticlientState, opts ...ResourceOption) (*Forticlient, error)
    public static Forticlient Get(string name, Input<string> id, ForticlientState? state, CustomResourceOptions? opts = null)
    public static Forticlient get(String name, Output<String> id, ForticlientState state, CustomResourceOptions options)
    Resource lookup is not supported in YAML
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    resource_name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    name
    The unique name of the resulting resource.
    id
    The unique provider ID of the resource to lookup.
    state
    Any extra arguments used during the lookup.
    opts
    A bag of options that control this resource's behavior.
    The following state arguments are supported:
    Phase2name string
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    Realm string
    FortiClient realm name.
    Status string
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    Usergroupname string
    User group name for FortiClient users.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    Phase2name string
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    Realm string
    FortiClient realm name.
    Status string
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    Usergroupname string
    User group name for FortiClient users.
    Vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name String
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    realm String
    FortiClient realm name.
    status String
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    usergroupname String
    User group name for FortiClient users.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name string
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    realm string
    FortiClient realm name.
    status string
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    usergroupname string
    User group name for FortiClient users.
    vdomparam string
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name str
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    realm str
    FortiClient realm name.
    status str
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    usergroupname str
    User group name for FortiClient users.
    vdomparam str
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.
    phase2name String
    Phase 2 tunnel name that you defined in the FortiClient dialup configuration.
    realm String
    FortiClient realm name.
    status String
    Enable/disable this FortiClient configuration. Valid values: enable, disable.
    usergroupname String
    User group name for FortiClient users.
    vdomparam String
    Specifies the vdom to which the resource will be applied when the FortiGate unit is running in VDOM mode. Only one vdom can be specified. If you want to inherit the vdom configuration of the provider, please do not set this parameter.

    Import

    VpnIpsec Forticlient can be imported using any of these accepted formats:

    $ pulumi import fortios:vpn/ipsec/forticlient:Forticlient labelname {{realm}}
    

    If you do not want to import arguments of block:

    $ export “FORTIOS_IMPORT_TABLE”=“false”

    $ pulumi import fortios:vpn/ipsec/forticlient:Forticlient labelname {{realm}}
    

    $ unset “FORTIOS_IMPORT_TABLE”

    To learn more about importing existing cloud resources, see Importing resources.

    Package Details

    Repository
    fortios pulumiverse/pulumi-fortios
    License
    Apache-2.0
    Notes
    This Pulumi package is based on the fortios Terraform Provider.
    fortios logo
    Fortios v0.0.5 published on Tuesday, Apr 9, 2024 by pulumiverse