google-native.compute/alpha.getFirewall

func LookupFirewall(ctx *Context, args *LookupFirewallArgs, opts ...InvokeOption) (*LookupFirewallResult, error)
func LookupFirewallOutput(ctx *Context, args *LookupFirewallOutputArgs, opts ...InvokeOption) LookupFirewallResultOutput

> Note: This function is named LookupFirewall in the Go SDK.

Firewall string

Project string

Firewall string

Project string

firewall String

project String

firewall string

project string

firewall str

project str

firewall String

project String

Allowed List<Pulumi.GoogleNative.Compute.Alpha.Outputs.FirewallAllowedItemResponse>

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

CreationTimestamp string

Creation timestamp in RFC3339 text format.

Denied List<Pulumi.GoogleNative.Compute.Alpha.Outputs.FirewallDeniedItemResponse>

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

Description string

An optional description of this resource. Provide this field when you create the resource.

DestinationRanges List<string>

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.

Direction string

Direction of traffic to which this firewall applies, either INGRESS or EGRESS. The default is INGRESS. For EGRESS traffic, you cannot specify the sourceTags fields.

Disabled bool

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

EnableLogging bool

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Deprecated:

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Kind string

Type of the resource. Always compute#firewall for firewall rules.

LogConfig Pulumi.GoogleNative.Compute.Alpha.Outputs.FirewallLogConfigResponse

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

Name string

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

Network string

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default

Priority int

Priority for this rule. This is an integer between 0 and 65535, both inclusive. The default value is 1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0 has higher precedence than a rule with priority 1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535. To avoid conflicts with the implied rules, use a priority number less than 65535.

SelfLink string

Server-defined URL for the resource.

SelfLinkWithId string

Server-defined URL for this resource with the resource id.

SourceRanges List<string>

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

SourceServiceAccounts List<string>

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.

SourceTags List<string>

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.

TargetServiceAccounts List<string>

A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.

TargetTags List<string>

A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.

Allowed []FirewallAllowedItemResponse

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

CreationTimestamp string

Creation timestamp in RFC3339 text format.

Denied []FirewallDeniedItemResponse

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

Description string

An optional description of this resource. Provide this field when you create the resource.

DestinationRanges []string

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.

Direction string

Direction of traffic to which this firewall applies, either INGRESS or EGRESS. The default is INGRESS. For EGRESS traffic, you cannot specify the sourceTags fields.

Disabled bool

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

EnableLogging bool

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Deprecated:

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Kind string

Type of the resource. Always compute#firewall for firewall rules.

LogConfig FirewallLogConfigResponse

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

Name string

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

Network string

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default

Priority int

Priority for this rule. This is an integer between 0 and 65535, both inclusive. The default value is 1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0 has higher precedence than a rule with priority 1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535. To avoid conflicts with the implied rules, use a priority number less than 65535.

SelfLink string

Server-defined URL for the resource.

SelfLinkWithId string

Server-defined URL for this resource with the resource id.

SourceRanges []string

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

SourceServiceAccounts []string

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.

SourceTags []string

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.

TargetServiceAccounts []string

A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.

TargetTags []string

A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.

allowed List<FirewallAllowedItemResponse>

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

creationTimestamp String

Creation timestamp in RFC3339 text format.

denied List<FirewallDeniedItemResponse>

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

description String

An optional description of this resource. Provide this field when you create the resource.

destinationRanges List<String>

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.

direction String

Direction of traffic to which this firewall applies, either INGRESS or EGRESS. The default is INGRESS. For EGRESS traffic, you cannot specify the sourceTags fields.

disabled Boolean

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

enableLogging Boolean

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Deprecated:

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

kind String

Type of the resource. Always compute#firewall for firewall rules.

logConfig FirewallLogConfigResponse

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

name String

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

network String

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default

priority Integer

Priority for this rule. This is an integer between 0 and 65535, both inclusive. The default value is 1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0 has higher precedence than a rule with priority 1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535. To avoid conflicts with the implied rules, use a priority number less than 65535.

selfLink String

Server-defined URL for the resource.

selfLinkWithId String

Server-defined URL for this resource with the resource id.

sourceRanges List<String>

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

sourceServiceAccounts List<String>

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.

sourceTags List<String>

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.

targetServiceAccounts List<String>

A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.

targetTags List<String>

A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.

allowed FirewallAllowedItemResponse[]

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

creationTimestamp string

Creation timestamp in RFC3339 text format.

denied FirewallDeniedItemResponse[]

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

description string

An optional description of this resource. Provide this field when you create the resource.

destinationRanges string[]

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.

direction string

Direction of traffic to which this firewall applies, either INGRESS or EGRESS. The default is INGRESS. For EGRESS traffic, you cannot specify the sourceTags fields.

disabled boolean

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

enableLogging boolean

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Deprecated:

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

kind string

Type of the resource. Always compute#firewall for firewall rules.

logConfig FirewallLogConfigResponse

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

name string

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

network string

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default

priority number

Priority for this rule. This is an integer between 0 and 65535, both inclusive. The default value is 1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0 has higher precedence than a rule with priority 1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535. To avoid conflicts with the implied rules, use a priority number less than 65535.

selfLink string

Server-defined URL for the resource.

selfLinkWithId string

Server-defined URL for this resource with the resource id.

sourceRanges string[]

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

sourceServiceAccounts string[]

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.

sourceTags string[]

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.

targetServiceAccounts string[]

A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.

targetTags string[]

A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.

allowed Sequence[FirewallAllowedItemResponse]

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

creation_timestamp str

Creation timestamp in RFC3339 text format.

denied Sequence[FirewallDeniedItemResponse]

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

description str

An optional description of this resource. Provide this field when you create the resource.

destination_ranges Sequence[str]

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.

direction str

Direction of traffic to which this firewall applies, either INGRESS or EGRESS. The default is INGRESS. For EGRESS traffic, you cannot specify the sourceTags fields.

disabled bool

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

enable_logging bool

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Deprecated:

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

kind str

Type of the resource. Always compute#firewall for firewall rules.

log_config FirewallLogConfigResponse

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

name str

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

network str

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default

priority int

Priority for this rule. This is an integer between 0 and 65535, both inclusive. The default value is 1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0 has higher precedence than a rule with priority 1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535. To avoid conflicts with the implied rules, use a priority number less than 65535.

self_link str

Server-defined URL for the resource.

self_link_with_id str

Server-defined URL for this resource with the resource id.

source_ranges Sequence[str]

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

source_service_accounts Sequence[str]

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.

source_tags Sequence[str]

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.

target_service_accounts Sequence[str]

A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.

target_tags Sequence[str]

A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.

allowed List<Property Map>

The list of ALLOW rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a permitted connection.

creationTimestamp String

Creation timestamp in RFC3339 text format.

denied List<Property Map>

The list of DENY rules specified by this firewall. Each rule specifies a protocol and port-range tuple that describes a denied connection.

description String

An optional description of this resource. Provide this field when you create the resource.

destinationRanges List<String>

If destination ranges are specified, the firewall rule applies only to traffic that has destination IP address in these ranges. These ranges must be expressed in CIDR format. Both IPv4 and IPv6 are supported.

direction String

Direction of traffic to which this firewall applies, either INGRESS or EGRESS. The default is INGRESS. For EGRESS traffic, you cannot specify the sourceTags fields.

disabled Boolean

Denotes whether the firewall rule is disabled. When set to true, the firewall rule is not enforced and the network behaves as if it did not exist. If this is unspecified, the firewall rule will be enabled.

enableLogging Boolean

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

Deprecated:

Deprecated in favor of enable in LogConfig. This field denotes whether to enable logging for a particular firewall rule. If logging is enabled, logs will be exported t Cloud Logging.

kind String

Type of the resource. Always compute#firewall for firewall rules.

logConfig Property Map

This field denotes the logging options for a particular firewall rule. If logging is enabled, logs will be exported to Cloud Logging.

name String

Name of the resource; provided by the client when the resource is created. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression [a-z]([-a-z0-9]*[a-z0-9])?. The first character must be a lowercase letter, and all following characters (except for the last character) must be a dash, lowercase letter, or digit. The last character must be a lowercase letter or digit.

network String

URL of the network resource for this firewall rule. If not specified when creating a firewall rule, the default network is used: global/networks/default If you choose to specify this field, you can specify the network as a full or partial URL. For example, the following are all valid URLs: - https://www.googleapis.com/compute/v1/projects/myproject/global/networks/my-network - projects/myproject/global/networks/my-network - global/networks/default

priority Number

Priority for this rule. This is an integer between 0 and 65535, both inclusive. The default value is 1000. Relative priorities determine which rule takes effect if multiple rules apply. Lower values indicate higher priority. For example, a rule with priority 0 has higher precedence than a rule with priority 1. DENY rules take precedence over ALLOW rules if they have equal priority. Note that VPC networks have implied rules with a priority of 65535. To avoid conflicts with the implied rules, use a priority number less than 65535.

selfLink String

Server-defined URL for the resource.

selfLinkWithId String

Server-defined URL for this resource with the resource id.

sourceRanges List<String>

If source ranges are specified, the firewall rule applies only to traffic that has a source IP address in these ranges. These ranges must be expressed in CIDR format. One or both of sourceRanges and sourceTags may be set. If both fields are set, the rule applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the rule to apply. Both IPv4 and IPv6 are supported.

sourceServiceAccounts List<String>

If source service accounts are specified, the firewall rules apply only to traffic originating from an instance with a service account in this list. Source service accounts cannot be used to control traffic to an instance's external IP address because service accounts are associated with an instance, not an IP address. sourceRanges can be set at the same time as sourceServiceAccounts. If both are set, the firewall applies to traffic that has a source IP address within the sourceRanges OR a source IP that belongs to an instance with service account listed in sourceServiceAccount. The connection does not need to match both fields for the firewall to apply. sourceServiceAccounts cannot be used at the same time as sourceTags or targetTags.

sourceTags List<String>

If source tags are specified, the firewall rule applies only to traffic with source IPs that match the primary network interfaces of VM instances that have the tag and are in the same VPC network. Source tags cannot be used to control traffic to an instance's external IP address, it only applies to traffic between instances in the same virtual network. Because tags are associated with instances, not IP addresses. One or both of sourceRanges and sourceTags may be set. If both fields are set, the firewall applies to traffic that has a source IP address within sourceRanges OR a source IP from a resource with a matching tag listed in the sourceTags field. The connection does not need to match both fields for the firewall to apply.

targetServiceAccounts List<String>

A list of service accounts indicating sets of instances located in the network that may make network connections as specified in allowed[]. targetServiceAccounts cannot be used at the same time as targetTags or sourceTags. If neither targetServiceAccounts nor targetTags are specified, the firewall rule applies to all instances on the specified network.

targetTags List<String>

A list of tags that controls which instances the firewall rule applies to. If targetTags are specified, then the firewall rule applies only to instances in the VPC network that have one of those tags. If no targetTags are specified, the firewall rule applies to all instances on the specified network.

IpProtocol string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

Ports List<string>

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

IpProtocol string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

Ports []string

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ipProtocol String

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports List<String>

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ipProtocol string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports string[]

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ip_protocol str

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports Sequence[str]

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ipProtocol String

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports List<String>

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

IpProtocol string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

Ports List<string>

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

IpProtocol string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

Ports []string

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ipProtocol String

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports List<String>

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ipProtocol string

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports string[]

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ip_protocol str

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports Sequence[str]

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

ipProtocol String

The IP protocol to which this rule applies. The protocol type is required when creating a firewall rule. This value can either be one of the following well known protocol strings (tcp, udp, icmp, esp, ah, ipip, sctp) or the IP protocol number.

ports List<String>

An optional list of ports to which this rule applies. This field is only applicable for the UDP or TCP protocol. Each entry must be either an integer or a range. If not specified, this rule applies to connections through any port. Example inputs include: ["22"], ["80","443"], and ["12345-12349"].

Enable bool

This field denotes whether to enable logging for a particular firewall rule.

Metadata string

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.

Enable bool

This field denotes whether to enable logging for a particular firewall rule.

Metadata string

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.

enable Boolean

This field denotes whether to enable logging for a particular firewall rule.

metadata String

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.

enable boolean

This field denotes whether to enable logging for a particular firewall rule.

metadata string

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.

enable bool

This field denotes whether to enable logging for a particular firewall rule.

metadata str

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.

enable Boolean

This field denotes whether to enable logging for a particular firewall rule.

metadata String

This field can only be specified for a particular firewall rule if logging is enabled for that rule. This field denotes whether to include or exclude metadata for firewall logs.