intersight.getComputeServerPowerParameters

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersComputeBlade

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersComputeRackUnit

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersParent

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersPermissionResource

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersRegisteredDevice

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersResult

AccountMoid string: The Account ID for this managed object.
AdditionalProperties string
Ancestors List<GetComputeServerPowerParametersResultAncestor>
ClassId string
ComputeBlades List<GetComputeServerPowerParametersResultComputeBlade>
ComputeRackUnits List<GetComputeServerPowerParametersResultComputeRackUnit>
CreateTime string: The time when this managed object was created.
DeviceMoId string: The database identifier of the registered device of an object.
Dn string: The Distinguished Name unambiguously identifies an object in the system.
DomainGroupMoid string: The DomainGroup ID for this managed object.
ModTime string: The time when this managed object was last modified.
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Owners List<string>
Parents List<GetComputeServerPowerParametersResultParent>
PermissionResources List<GetComputeServerPowerParametersResultPermissionResource>
PowerAllocation double: This field identifies the maximum power that has been allocated to the blade by CMC in Watts. Power budget for the chassis is configured by the power policy. That budget is then divided among the blades in the chassis by CMC.
PowerPriority string: Power Priority level of the Server. This priority is used to determine the initial power allocation for servers. This field is only supported for Cisco UCS B series and X series servers.* Unknown - Power allocation priority of server is either unknown or not supported on CMC firmware version.* Low - Power allocation priority of server is low.* Medium - Power allocation priority of server is medium.* High - Power allocation priority of server is high.
PowerProfiling string: Status of Power Profiling setting of the Server. If Enabled, this field allows the power manager to run power profiling utility to determine the power needs of the server. This field is only supported for Cisco UCS X series servers.* Unknown - Power Profiling state is either unknown for the server or not supported on BMC firmware version.* Enabled - Power Profiling is enabled for the server.* Disabled - Power Profiling is either disabled for the server or not supported on BMC firmware version.
PowerRestore string: Value of the power restore policy for the server. In the absence of Intersight connectivity, the server will use this state to recover the host power after a power loss event.* Unknown - Power restore state for the server is either Unknown or not supported on BMC firmware version.* Always On - Power restore state for server is set to Always On.* Always Off - Power restore state for server is set to Always Off.* Last State - Power restore state for server is set to Last State.
ProcessorPackagePowerLimit string: Processor Package Power Limit (PPL) of a server. PPL refers to the amount of power that a CPU can draw from the power supply. The Processor Package Power Limit (PPL) feature is currently available exclusively on Cisco UCS C225/C245 M8 servers.* Unknown - Processor package power limit is either unknown for the server or not supported on BMC firmware version.* Default - Processor package power limit is default for the server.* Maximum - Processor package power limit is maximum for the server.* Minimum - Processor package power limit is minimum for the server.
RegisteredDevices List<GetComputeServerPowerParametersResultRegisteredDevice>
Rn string: The Relative Name uniquely identifies an object within a given context.
SharedScope string: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
Tags List<GetComputeServerPowerParametersResultTag>
VersionContexts List<GetComputeServerPowerParametersResultVersionContext>

AccountMoid string: The Account ID for this managed object.
AdditionalProperties string
Ancestors []GetComputeServerPowerParametersResultAncestor
ClassId string
ComputeBlades []GetComputeServerPowerParametersResultComputeBlade
ComputeRackUnits []GetComputeServerPowerParametersResultComputeRackUnit
CreateTime string: The time when this managed object was created.
DeviceMoId string: The database identifier of the registered device of an object.
Dn string: The Distinguished Name unambiguously identifies an object in the system.
DomainGroupMoid string: The DomainGroup ID for this managed object.
ModTime string: The time when this managed object was last modified.
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Owners []string
Parents []GetComputeServerPowerParametersResultParent
PermissionResources []GetComputeServerPowerParametersResultPermissionResource
PowerAllocation float64: This field identifies the maximum power that has been allocated to the blade by CMC in Watts. Power budget for the chassis is configured by the power policy. That budget is then divided among the blades in the chassis by CMC.
PowerPriority string: Power Priority level of the Server. This priority is used to determine the initial power allocation for servers. This field is only supported for Cisco UCS B series and X series servers.* Unknown - Power allocation priority of server is either unknown or not supported on CMC firmware version.* Low - Power allocation priority of server is low.* Medium - Power allocation priority of server is medium.* High - Power allocation priority of server is high.
PowerProfiling string: Status of Power Profiling setting of the Server. If Enabled, this field allows the power manager to run power profiling utility to determine the power needs of the server. This field is only supported for Cisco UCS X series servers.* Unknown - Power Profiling state is either unknown for the server or not supported on BMC firmware version.* Enabled - Power Profiling is enabled for the server.* Disabled - Power Profiling is either disabled for the server or not supported on BMC firmware version.
PowerRestore string: Value of the power restore policy for the server. In the absence of Intersight connectivity, the server will use this state to recover the host power after a power loss event.* Unknown - Power restore state for the server is either Unknown or not supported on BMC firmware version.* Always On - Power restore state for server is set to Always On.* Always Off - Power restore state for server is set to Always Off.* Last State - Power restore state for server is set to Last State.
ProcessorPackagePowerLimit string: Processor Package Power Limit (PPL) of a server. PPL refers to the amount of power that a CPU can draw from the power supply. The Processor Package Power Limit (PPL) feature is currently available exclusively on Cisco UCS C225/C245 M8 servers.* Unknown - Processor package power limit is either unknown for the server or not supported on BMC firmware version.* Default - Processor package power limit is default for the server.* Maximum - Processor package power limit is maximum for the server.* Minimum - Processor package power limit is minimum for the server.
RegisteredDevices []GetComputeServerPowerParametersResultRegisteredDevice
Rn string: The Relative Name uniquely identifies an object within a given context.
SharedScope string: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
Tags []GetComputeServerPowerParametersResultTag
VersionContexts []GetComputeServerPowerParametersResultVersionContext

accountMoid String: The Account ID for this managed object.
additionalProperties String
ancestors List<GetComputeServerPowerParametersResultAncestor>
classId String
computeBlades List<GetComputeServerPowerParametersResultComputeBlade>
computeRackUnits List<GetComputeServerPowerParametersResultComputeRackUnit>
createTime String: The time when this managed object was created.
deviceMoId String: The database identifier of the registered device of an object.
dn String: The Distinguished Name unambiguously identifies an object in the system.
domainGroupMoid String: The DomainGroup ID for this managed object.
modTime String: The time when this managed object was last modified.
moid String: The unique identifier of this Managed Object instance.
objectType String
owners List<String>
parents List<GetComputeServerPowerParametersResultParent>
permissionResources List<GetComputeServerPowerParametersResultPermissionResource>
powerAllocation Double: This field identifies the maximum power that has been allocated to the blade by CMC in Watts. Power budget for the chassis is configured by the power policy. That budget is then divided among the blades in the chassis by CMC.
powerPriority String: Power Priority level of the Server. This priority is used to determine the initial power allocation for servers. This field is only supported for Cisco UCS B series and X series servers.* Unknown - Power allocation priority of server is either unknown or not supported on CMC firmware version.* Low - Power allocation priority of server is low.* Medium - Power allocation priority of server is medium.* High - Power allocation priority of server is high.
powerProfiling String: Status of Power Profiling setting of the Server. If Enabled, this field allows the power manager to run power profiling utility to determine the power needs of the server. This field is only supported for Cisco UCS X series servers.* Unknown - Power Profiling state is either unknown for the server or not supported on BMC firmware version.* Enabled - Power Profiling is enabled for the server.* Disabled - Power Profiling is either disabled for the server or not supported on BMC firmware version.
powerRestore String: Value of the power restore policy for the server. In the absence of Intersight connectivity, the server will use this state to recover the host power after a power loss event.* Unknown - Power restore state for the server is either Unknown or not supported on BMC firmware version.* Always On - Power restore state for server is set to Always On.* Always Off - Power restore state for server is set to Always Off.* Last State - Power restore state for server is set to Last State.
processorPackagePowerLimit String: Processor Package Power Limit (PPL) of a server. PPL refers to the amount of power that a CPU can draw from the power supply. The Processor Package Power Limit (PPL) feature is currently available exclusively on Cisco UCS C225/C245 M8 servers.* Unknown - Processor package power limit is either unknown for the server or not supported on BMC firmware version.* Default - Processor package power limit is default for the server.* Maximum - Processor package power limit is maximum for the server.* Minimum - Processor package power limit is minimum for the server.
registeredDevices List<GetComputeServerPowerParametersResultRegisteredDevice>
rn String: The Relative Name uniquely identifies an object within a given context.
sharedScope String: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
tags List<GetComputeServerPowerParametersResultTag>
versionContexts List<GetComputeServerPowerParametersResultVersionContext>

accountMoid string: The Account ID for this managed object.
additionalProperties string
ancestors GetComputeServerPowerParametersResultAncestor[]
classId string
computeBlades GetComputeServerPowerParametersResultComputeBlade[]
computeRackUnits GetComputeServerPowerParametersResultComputeRackUnit[]
createTime string: The time when this managed object was created.
deviceMoId string: The database identifier of the registered device of an object.
dn string: The Distinguished Name unambiguously identifies an object in the system.
domainGroupMoid string: The DomainGroup ID for this managed object.
modTime string: The time when this managed object was last modified.
moid string: The unique identifier of this Managed Object instance.
objectType string
owners string[]
parents GetComputeServerPowerParametersResultParent[]
permissionResources GetComputeServerPowerParametersResultPermissionResource[]
powerAllocation number: This field identifies the maximum power that has been allocated to the blade by CMC in Watts. Power budget for the chassis is configured by the power policy. That budget is then divided among the blades in the chassis by CMC.
powerPriority string: Power Priority level of the Server. This priority is used to determine the initial power allocation for servers. This field is only supported for Cisco UCS B series and X series servers.* Unknown - Power allocation priority of server is either unknown or not supported on CMC firmware version.* Low - Power allocation priority of server is low.* Medium - Power allocation priority of server is medium.* High - Power allocation priority of server is high.
powerProfiling string: Status of Power Profiling setting of the Server. If Enabled, this field allows the power manager to run power profiling utility to determine the power needs of the server. This field is only supported for Cisco UCS X series servers.* Unknown - Power Profiling state is either unknown for the server or not supported on BMC firmware version.* Enabled - Power Profiling is enabled for the server.* Disabled - Power Profiling is either disabled for the server or not supported on BMC firmware version.
powerRestore string: Value of the power restore policy for the server. In the absence of Intersight connectivity, the server will use this state to recover the host power after a power loss event.* Unknown - Power restore state for the server is either Unknown or not supported on BMC firmware version.* Always On - Power restore state for server is set to Always On.* Always Off - Power restore state for server is set to Always Off.* Last State - Power restore state for server is set to Last State.
processorPackagePowerLimit string: Processor Package Power Limit (PPL) of a server. PPL refers to the amount of power that a CPU can draw from the power supply. The Processor Package Power Limit (PPL) feature is currently available exclusively on Cisco UCS C225/C245 M8 servers.* Unknown - Processor package power limit is either unknown for the server or not supported on BMC firmware version.* Default - Processor package power limit is default for the server.* Maximum - Processor package power limit is maximum for the server.* Minimum - Processor package power limit is minimum for the server.
registeredDevices GetComputeServerPowerParametersResultRegisteredDevice[]
rn string: The Relative Name uniquely identifies an object within a given context.
sharedScope string: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
tags GetComputeServerPowerParametersResultTag[]
versionContexts GetComputeServerPowerParametersResultVersionContext[]

account_moid str: The Account ID for this managed object.
additional_properties str
ancestors Sequence[GetComputeServerPowerParametersResultAncestor]
class_id str
compute_blades Sequence[GetComputeServerPowerParametersResultComputeBlade]
compute_rack_units Sequence[GetComputeServerPowerParametersResultComputeRackUnit]
create_time str: The time when this managed object was created.
device_mo_id str: The database identifier of the registered device of an object.
dn str: The Distinguished Name unambiguously identifies an object in the system.
domain_group_moid str: The DomainGroup ID for this managed object.
mod_time str: The time when this managed object was last modified.
moid str: The unique identifier of this Managed Object instance.
object_type str
owners Sequence[str]
parents Sequence[GetComputeServerPowerParametersResultParent]
permission_resources Sequence[GetComputeServerPowerParametersResultPermissionResource]
power_allocation float: This field identifies the maximum power that has been allocated to the blade by CMC in Watts. Power budget for the chassis is configured by the power policy. That budget is then divided among the blades in the chassis by CMC.
power_priority str: Power Priority level of the Server. This priority is used to determine the initial power allocation for servers. This field is only supported for Cisco UCS B series and X series servers.* Unknown - Power allocation priority of server is either unknown or not supported on CMC firmware version.* Low - Power allocation priority of server is low.* Medium - Power allocation priority of server is medium.* High - Power allocation priority of server is high.
power_profiling str: Status of Power Profiling setting of the Server. If Enabled, this field allows the power manager to run power profiling utility to determine the power needs of the server. This field is only supported for Cisco UCS X series servers.* Unknown - Power Profiling state is either unknown for the server or not supported on BMC firmware version.* Enabled - Power Profiling is enabled for the server.* Disabled - Power Profiling is either disabled for the server or not supported on BMC firmware version.
power_restore str: Value of the power restore policy for the server. In the absence of Intersight connectivity, the server will use this state to recover the host power after a power loss event.* Unknown - Power restore state for the server is either Unknown or not supported on BMC firmware version.* Always On - Power restore state for server is set to Always On.* Always Off - Power restore state for server is set to Always Off.* Last State - Power restore state for server is set to Last State.
processor_package_power_limit str: Processor Package Power Limit (PPL) of a server. PPL refers to the amount of power that a CPU can draw from the power supply. The Processor Package Power Limit (PPL) feature is currently available exclusively on Cisco UCS C225/C245 M8 servers.* Unknown - Processor package power limit is either unknown for the server or not supported on BMC firmware version.* Default - Processor package power limit is default for the server.* Maximum - Processor package power limit is maximum for the server.* Minimum - Processor package power limit is minimum for the server.
registered_devices Sequence[GetComputeServerPowerParametersResultRegisteredDevice]
rn str: The Relative Name uniquely identifies an object within a given context.
shared_scope str: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
tags Sequence[GetComputeServerPowerParametersResultTag]
version_contexts Sequence[GetComputeServerPowerParametersResultVersionContext]

accountMoid String: The Account ID for this managed object.
additionalProperties String
ancestors List<Property Map>
classId String
computeBlades List<Property Map>
computeRackUnits List<Property Map>
createTime String: The time when this managed object was created.
deviceMoId String: The database identifier of the registered device of an object.
dn String: The Distinguished Name unambiguously identifies an object in the system.
domainGroupMoid String: The DomainGroup ID for this managed object.
modTime String: The time when this managed object was last modified.
moid String: The unique identifier of this Managed Object instance.
objectType String
owners List<String>
parents List<Property Map>
permissionResources List<Property Map>
powerAllocation Number: This field identifies the maximum power that has been allocated to the blade by CMC in Watts. Power budget for the chassis is configured by the power policy. That budget is then divided among the blades in the chassis by CMC.
powerPriority String: Power Priority level of the Server. This priority is used to determine the initial power allocation for servers. This field is only supported for Cisco UCS B series and X series servers.* Unknown - Power allocation priority of server is either unknown or not supported on CMC firmware version.* Low - Power allocation priority of server is low.* Medium - Power allocation priority of server is medium.* High - Power allocation priority of server is high.
powerProfiling String: Status of Power Profiling setting of the Server. If Enabled, this field allows the power manager to run power profiling utility to determine the power needs of the server. This field is only supported for Cisco UCS X series servers.* Unknown - Power Profiling state is either unknown for the server or not supported on BMC firmware version.* Enabled - Power Profiling is enabled for the server.* Disabled - Power Profiling is either disabled for the server or not supported on BMC firmware version.
powerRestore String: Value of the power restore policy for the server. In the absence of Intersight connectivity, the server will use this state to recover the host power after a power loss event.* Unknown - Power restore state for the server is either Unknown or not supported on BMC firmware version.* Always On - Power restore state for server is set to Always On.* Always Off - Power restore state for server is set to Always Off.* Last State - Power restore state for server is set to Last State.
processorPackagePowerLimit String: Processor Package Power Limit (PPL) of a server. PPL refers to the amount of power that a CPU can draw from the power supply. The Processor Package Power Limit (PPL) feature is currently available exclusively on Cisco UCS C225/C245 M8 servers.* Unknown - Processor package power limit is either unknown for the server or not supported on BMC firmware version.* Default - Processor package power limit is default for the server.* Maximum - Processor package power limit is maximum for the server.* Minimum - Processor package power limit is minimum for the server.
registeredDevices List<Property Map>
rn String: The Relative Name uniquely identifies an object within a given context.
sharedScope String: Intersight provides pre-built workflows, tasks and policies to end users through global catalogs.Objects that are made available through global catalogs are said to have a 'shared' ownership. Shared objects are either made globally available to all end users or restricted to end users based on their license entitlement. Users can use this property to differentiate the scope (global or a specific license tier) to which a shared MO belongs.
tags List<Property Map>
versionContexts List<Property Map>

GetComputeServerPowerParametersResultAncestor

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultComputeBlade

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultComputeRackUnit

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultParent

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultPermissionResource

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultRegisteredDevice

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultTag

AdditionalProperties string
Key string
Value string

AdditionalProperties string
Key string
Value string

additionalProperties String
key String
value String

additionalProperties string
key string
value string

additional_properties str
key str
value str

additionalProperties String
key String
value String

GetComputeServerPowerParametersResultVersionContext

AdditionalProperties string
ClassId string
InterestedMos List<GetComputeServerPowerParametersResultVersionContextInterestedMo>
MarkedForDeletion bool
NrVersion string
ObjectType string
RefMos List<GetComputeServerPowerParametersResultVersionContextRefMo>
Timestamp string
VersionType string

AdditionalProperties string
ClassId string
InterestedMos []GetComputeServerPowerParametersResultVersionContextInterestedMo
MarkedForDeletion bool
NrVersion string
ObjectType string
RefMos []GetComputeServerPowerParametersResultVersionContextRefMo
Timestamp string
VersionType string

additionalProperties String
classId String
interestedMos List<GetComputeServerPowerParametersResultVersionContextInterestedMo>
markedForDeletion Boolean
nrVersion String
objectType String
refMos List<GetComputeServerPowerParametersResultVersionContextRefMo>
timestamp String
versionType String

additionalProperties string
classId string
interestedMos GetComputeServerPowerParametersResultVersionContextInterestedMo[]
markedForDeletion boolean
nrVersion string
objectType string
refMos GetComputeServerPowerParametersResultVersionContextRefMo[]
timestamp string
versionType string

additional_properties str
class_id str
interested_mos Sequence[GetComputeServerPowerParametersResultVersionContextInterestedMo]
marked_for_deletion bool
nr_version str
object_type str
ref_mos Sequence[GetComputeServerPowerParametersResultVersionContextRefMo]
timestamp str
version_type str

additionalProperties String
classId String
interestedMos List<Property Map>
markedForDeletion Boolean
nrVersion String
objectType String
refMos List<Property Map>
timestamp String
versionType String

GetComputeServerPowerParametersResultVersionContextInterestedMo

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersResultVersionContextRefMo

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

AdditionalProperties string
ClassId string
Moid string: The unique identifier of this Managed Object instance.
ObjectType string
Selector string

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

additionalProperties string
classId string
moid string: The unique identifier of this Managed Object instance.
objectType string
selector string

additional_properties str
class_id str
moid str: The unique identifier of this Managed Object instance.
object_type str
selector str

additionalProperties String
classId String
moid String: The unique identifier of this Managed Object instance.
objectType String
selector String

GetComputeServerPowerParametersTag

AdditionalProperties string
Key string: The string representation of a tag key.
Value string: The string representation of a tag value.

AdditionalProperties string
Key string: The string representation of a tag key.
Value string: The string representation of a tag value.

additionalProperties String
key String: The string representation of a tag key.
value String: The string representation of a tag value.

additionalProperties string
key string: The string representation of a tag key.
value string: The string representation of a tag value.

additional_properties str
key str: The string representation of a tag key.
value str: The string representation of a tag value.

additionalProperties String
key String: The string representation of a tag key.
value String: The string representation of a tag value.

GetComputeServerPowerParametersVersionContext

InterestedMos List<GetComputeServerPowerParametersVersionContextInterestedMo>

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

MarkedForDeletion bool

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

NrVersion string

The version of the Managed Object, e.g. an incrementing number or a hash id.

ObjectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

RefMo GetComputeServerPowerParametersVersionContextRefMo

A reference to the original Managed Object.

Timestamp string

The time this versioned Managed Object was created.

VersionType string

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

InterestedMos []GetComputeServerPowerParametersVersionContextInterestedMo

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

MarkedForDeletion bool

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

NrVersion string

The version of the Managed Object, e.g. an incrementing number or a hash id.

ObjectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

RefMo GetComputeServerPowerParametersVersionContextRefMo

A reference to the original Managed Object.

Timestamp string

The time this versioned Managed Object was created.

VersionType string

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interestedMos List<GetComputeServerPowerParametersVersionContextInterestedMo>

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

markedForDeletion Boolean

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nrVersion String

The version of the Managed Object, e.g. an incrementing number or a hash id.

objectType String

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

refMo GetComputeServerPowerParametersVersionContextRefMo

A reference to the original Managed Object.

timestamp String

The time this versioned Managed Object was created.

versionType String

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interestedMos GetComputeServerPowerParametersVersionContextInterestedMo[]

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

markedForDeletion boolean

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nrVersion string

The version of the Managed Object, e.g. an incrementing number or a hash id.

objectType string

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

refMo GetComputeServerPowerParametersVersionContextRefMo

A reference to the original Managed Object.

timestamp string

The time this versioned Managed Object was created.

versionType string

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interested_mos Sequence[GetComputeServerPowerParametersVersionContextInterestedMo]

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

marked_for_deletion bool

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nr_version str

The version of the Managed Object, e.g. an incrementing number or a hash id.

ref_mo GetComputeServerPowerParametersVersionContextRefMo

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

A reference to the original Managed Object.

timestamp str

The time this versioned Managed Object was created.

version_type str

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

interestedMos List<Property Map>

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

markedForDeletion Boolean

The flag to indicate if snapshot is marked for deletion or not. If flag is set then snapshot will be removed after the successful deployment of the policy.

nrVersion String

The version of the Managed Object, e.g. an incrementing number or a hash id.

objectType String

The fully-qualified name of the instantiated, concrete type. The value should be the same as the 'ClassId' property.

refMo Property Map

A reference to the original Managed Object.

timestamp String

The time this versioned Managed Object was created.

versionType String

Specifies type of version. Currently the only supported value is "Configured" that is used to keep track of snapshots of policies and profiles that are intended to be configured to target endpoints.

Modified - Version created every time an object is modified.
Configured - Version created every time an object is configured to the service profile.
Deployed - Version created for objects related to a service profile when it is deployed.

GetComputeServerPowerParametersVersionContextInterestedMo

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

GetComputeServerPowerParametersVersionContextRefMo

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

ClassId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

Moid string

The unique identifier of this Managed Object instance.

ObjectType string

The fully-qualified name of the remote type referred by this relationship.

Selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId String

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid String

The unique identifier of this Managed Object instance.

objectType String

The fully-qualified name of the remote type referred by this relationship.

selector String

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

classId string

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid string

The unique identifier of this Managed Object instance.

objectType string

The fully-qualified name of the remote type referred by this relationship.

selector string

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.

class_id str

The fully-qualified name of the instantiated, concrete type. This property is used as a discriminator to identify the type of the payload when marshaling and unmarshaling data.

moid str

The unique identifier of this Managed Object instance.

The fully-qualified name of the remote type referred by this relationship.

selector str

An OData $filter expression which describes the REST resource to be referenced. This field may be set instead of 'moid' by clients.

If 'moid' is set this field is ignored.
If 'selector' is set and 'moid' is empty/absent from the request, Intersight determines the Moid of the resource matching the filter expression and populates it in the MoRef that is part of the object instance being inserted/updated to fulfill the REST request. An error is returned if the filter matches zero or more than one REST resource. An example filter string is: Serial eq '3AA8B7T11'.